Forums59
Topics1,039,183
Posts13,960,493
Members144,192
|
Most Online39,925 Dec 30th, 2023
|
|
Abu 6500 will not engage
#12896513
09/12/18 12:27 PM
|
Joined: Jul 2018
Posts: 1,149
Ocelot
OP
Extreme Angler
|
OP
Extreme Angler
Joined: Jul 2018
Posts: 1,149 |
My abu 6500 c3 recently developed a problem where after a cast or lowering the line the spool will not engage after I start reeling in. I have to pull up on the release button to take it out of free spool.
I would normally take it to the shop to get fixed but have a big trip coming up mid next week.
Any ideas on how to fix this?
|
|
Re: Abu 6500 will not engage
[Re: Ocelot]
#12896608
09/12/18 01:44 PM
|
Joined: Apr 2012
Posts: 3,275
03svtsnakevert
TFF Team Angler
|
TFF Team Angler
Joined: Apr 2012
Posts: 3,275 |
Could be a couple of things...dirty to the point that it will not operate smoothly or a misalignment between the Star wheel and the clutch arm
Last edited by 03svtsnakevert; 09/12/18 01:44 PM.
|
|
Re: Abu 6500 will not engage
[Re: 03svtsnakevert]
#12896878
09/12/18 04:32 PM
|
Joined: Jul 2018
Posts: 1,149
Ocelot
OP
Extreme Angler
|
OP
Extreme Angler
Joined: Jul 2018
Posts: 1,149 |
So you are suggesting clean and regrease the position holder and clutch arm?
I tried to fix a different problem, pin on thumb release was not long enough to put into free spool, on a another reel a while back and when I put back together I had this happen afterwards. Any suggestions or pointers? maybe not enough or too much grease, there does not look to be much grease under the position holder and module.
|
|
Re: Abu 6500 will not engage
[Re: Ocelot]
#12897657
09/13/18 11:18 AM
|
Joined: Apr 2012
Posts: 3,275
03svtsnakevert
TFF Team Angler
|
TFF Team Angler
Joined: Apr 2012
Posts: 3,275 |
So you are suggesting clean and regrease the position holder and clutch arm?
I tried to fix a different problem, pin on thumb release was not long enough to put into free spool, on a another reel a while back and when I put back together I had this happen afterwards. Any suggestions or pointers? maybe not enough or too much grease, there does not look to be much grease under the position holder and module.
I responded to your email
|
|
Re: Abu 6500 will not engage
[Re: 03svtsnakevert]
#12903107
09/18/18 01:34 PM
|
Joined: Jul 2018
Posts: 1,149
Ocelot
OP
Extreme Angler
|
OP
Extreme Angler
Joined: Jul 2018
Posts: 1,149 |
Took reel apart, cleaned, greased and put back together. Reel now works like a champ. 1st time I have been able to fix this problem myself. Thanks for the input.
|
|
Re: Abu 6500 will not engage
[Re: Ocelot]
#12903206
09/18/18 03:17 PM
|
Joined: Apr 2012
Posts: 3,275
03svtsnakevert
TFF Team Angler
|
TFF Team Angler
Joined: Apr 2012
Posts: 3,275 |
Took reel apart, cleaned, greased and put back together. Reel now works like a champ. 1st time I have been able to fix this problem myself. Thanks for the input. Great job!! Figured that was all it needed
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|