Forums59
Topics1,038,947
Posts13,956,234
Members144,183
|
Most Online39,925 Dec 30th, 2023
|
|
MG xi5 mounting
#11633340
05/29/16 01:53 PM
|
Joined: Dec 2014
Posts: 371
fe1
OP
Angler
|
OP
Angler
Joined: Dec 2014
Posts: 371 |
Any one have any tips and tricks for mounting a MotorGuide xi5 on a Bass Tracker pro crappie 175 boat? All comments are welcomed.
|
|
Re: MG xi5 mounting
[Re: fe1]
#11636207
05/31/16 01:02 AM
|
Joined: Feb 2010
Posts: 12,111
shut-up-and-fish
TFF Guru
|
TFF Guru
Joined: Feb 2010
Posts: 12,111 |
What is your biggest concern?
Is there access to the bow area to tighten the mounting bolts?
www.shut-up-and-fish.comFrom *Sales, *Installation Services, and *On the shop floor Education & Instructional Tips We have you covered here @ shut-up-and-fish for all of your Humminbird, Lowrance, Garmin, Minn Kota & Motorguide needs plus much more - Call Now 972 822 9285
|
|
Re: MG xi5 mounting
[Re: shut-up-and-fish]
#11636248
05/31/16 01:14 AM
|
Joined: Dec 2014
Posts: 371
fe1
OP
Angler
|
OP
Angler
Joined: Dec 2014
Posts: 371 |
What is your biggest concern?
Is there access to the bow area to tighten the mounting bolts?
No sir no access under deck. I figured on using the toggle type bolts.I have read somewhere that location placement could or might be an issue when loading and unloading due to the distance they extend from the bow.
|
|
Re: MG xi5 mounting
[Re: fe1]
#11636394
05/31/16 02:09 AM
|
Joined: Jul 2014
Posts: 4,340
Bobby Milam
TFF Team Angler
|
TFF Team Angler
Joined: Jul 2014
Posts: 4,340 |
I don't know about the XI5 but I had a Terrova and read a lot about placement issues. Get some chalk and outline it. Open and closed and consider how the boat slides off the trailer. Measure and remeasure and then drill holes. There's still going to be doubt in your mind about drilling even after you do all this. If you take your time, you'll find the best spot for you. Mine never had any of the common issues loading or unloading.
The other option is to see if they have a sliding plate that you can mount it to.
|
|
Re: MG xi5 mounting
[Re: fe1]
#11637890
05/31/16 07:28 PM
|
Joined: Jun 2010
Posts: 8,826
BlueNitro
TFF Celebrity
|
TFF Celebrity
Joined: Jun 2010
Posts: 8,826 |
PM Sent.
Do you have a current TM on the boat now with existing holes?
LiftSaver Trolling Motor Mounting Bracket - Patent Pending and LiftSaver Transducer Pole Mount www.liftsavertmmount.comWorks with MG Xi5, Xi3 and MK Terrova, Ulterra, PD V2 and Riptides as well.
|
|
Re: MG xi5 mounting
[Re: Bobby Milam]
#11637897
05/31/16 07:31 PM
|
Joined: Jun 2010
Posts: 8,826
BlueNitro
TFF Celebrity
|
TFF Celebrity
Joined: Jun 2010
Posts: 8,826 |
The other option is to see if they have a sliding plate that you can mount it to. The sliding brackets don't work because of the bulbous nose on the Xi5. You can spend a lot of money and it can still hit the bow roller.
LiftSaver Trolling Motor Mounting Bracket - Patent Pending and LiftSaver Transducer Pole Mount www.liftsavertmmount.comWorks with MG Xi5, Xi3 and MK Terrova, Ulterra, PD V2 and Riptides as well.
|
|
Re: MG xi5 mounting
[Re: BlueNitro]
#11638218
05/31/16 09:43 PM
|
Joined: Dec 2014
Posts: 371
fe1
OP
Angler
|
OP
Angler
Joined: Dec 2014
Posts: 371 |
Yes there is. Pm returned. PM Sent.
Do you have a current TM on the boat now with existing holes?
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|