I broke off a downscan transducer. The brand of the units is not my question, I have a or two installed somewhere on the starboard side of the boat that I need to be able to unplug, and connect the replacement transducer. I have checked storage and rod boxes, and under the console anyone know of a 'hidden' place they would have installed it, and how to access it? It is not under the deck/in the rigging compartment, the cable is running up by the driver seat at least, possibly up to the console, but I just can't find it. Share your thoughts... Is there a void under the seats? Other than the access panel under the console, is there some additional 'removable' area to access between the console and the rod locker?

Lowrance is the only one that has Down Scan.

A more coherent description of your issue would help.

If you broke off a transducer it will probably need to be replaced I'm sending a p.m. With more information

It's RayMarine, transducer is gone, so I have a new one. The problem is I can't find the CP � 100 box it needs to plug into. That is one of the two boxes in the boat somewhere installed that I cannot find. The other box is a CP � 200 for my sidescan although I don't need to do anything with it at this time.

I was trying to keep it generic because at this point, I am trying to find places where t me get be mounted. So the question is more about 'voids' in the FX21 and how to access them...

Major corrections are made to this post because voice to text didn't interpret what I was trying to say the first time...

I may have my answer. According to the dealer it was installed under the console. I am to look for four screws near the fuse box in the starboard locker to remove the access panel. I will update when I find it, in the meantime, any pictures of the removed panel before I get off work and get to the boat is appreciated.

Panel between starboard locker and center boxes held the CP-100 and CP-200 boxes. SeaTalk Ethernet hub was below console. Ugh, hot! Thanks 2ManyRangers!!!