I have a X-15 mounted at my console and an X-102c in storage. I love the graph on the 102 but gotta have the mapping of 15. Was thinking of mounting both at the console anyone running 2 graphs at one spot have any advice on do's and donts. Was a little worried about interference between the 2 transducers, is this an issue?

I would sell both those "old" graphs and buy one newer graph with more features. For around $650 u could pick up a bird 798side imaging!

Use one as straight map and the other as a depth finder. My buddy did this with 2 graphs and seems to work out pretty good.

Heck, you could sell me that 10" para lift for a $150 to get started

Ok I understand in the mythical world I could just go buy a HDS-10 but I've got these two graphs on hand am I gonna run into any issues? And I'm gonna talk to the guy and see if it's cool if I sell the para- lifts because I don't think they're gonna jive with my steering on my boat

1+
I use a HDS 8 for mapping and the HDs 10 for sonar and structurescan. No need to run a transducer cable to both.

Why limit your self run a transfer for both they really shouldn't interfere.

PKRAT, I have a 102 on my console along with a bird 898. I get great pics and fish readings with the 102. I would not trade it. I don't think you will have interference.You might want to separate the transducers though.( One on one side of hull- one on the other). If you have any questions, shoot me a pm .P.S A big part of really good readings on the 102 are from proper settings. Good luck!

I've done this for quite a while and it works great.