Do any of you guys remove the anti reverse pawl on the Curado e series…..does it make a difference. Also I use braid 10 lb on most of my set ups if that matters?

I usually remove it on mine. I've not found it to make much a difference either way though.

I throw it away every time

Thats what the roller bearing is for

Remove it. If you take care of your reel and service it frequently there is no need for it in the reel

plus it makes a lot of noise after a while

I removed all of mine. The JDM equivalent Scorpion 1500XT doesn't have one. I think it is put on there because of them American anglers who sometimes use heavy braid on these reels. It will noticeably free up the retrieve.

I take it out as soon and I buy the reels. They make a clicking noise after time because the pawl hops up and down. Stupid design fix

I cannot get over folks that reverse engineer reels.

That AR Pawl serves a purpose and will actually save component wear on other parts in that reel.

A properly serviced reel will see years and years of wear with no problem on that pawl. Even Garcia has used that system for years without the use of a One way roller bearing/