Hey Guys
We wanted to let everyone know we will have the new tube molds on line tonight and our new craZcraw has became our hottest seller. Here is a peak at what they look like. Also have a fluke mold we call the twitchy minnow that is available in single cavity for making 2 color laminates and a 3 cavity for solid colors.



This tube will be available in 3 sizes with all kinds of options.






Here is the craZcraw that is killing the fish!!



3 Cavity Twitchy Minnow




Single Cavity for 2 color laminates




Check them out at www.bearsbaits.com/Cart

David , Those look good I like the craw

Looks good, Bear. I'm going to have to spend some money and buy one of those tube molds.
H20 Dawg ><>

Thanks Guys. The craw is a winner. It has been catching fish every where it has been tried as Jig Trailer, T-Rigged, C- Rigged, Shaky Head and pulled over the grass weightless! The Tube mold will allow you 12 combination with the same mold just by changing components. If you want a 3 color tube it is fairly simple you can shoot it with 2 color injector then dip the body in the 3rd color.

Bear,
I went to your site and am a little confused. You have a price for 3 1/2", 4", and 4 1/2" on the tube mold. You say you can get 12 different baits by changing components. Are they actually three different molds (one mold will only do one length) or does the 4 1/2" mold get you all the components to make all three lengths?
Thanks,
H20 Dawg ><>

The mold itself is sold in 3 pieces. The small is a 3.5" mold. it will come with the 1 3/4" body and the 1 3/4" Skirt mandrel. The nose insert will make a 1/4" thick tube at the nose. Same with the other size molds. Now you can take any nose piece and add to any body or skirt mandrel. For Instance you can use the 2 1/4" body with the 1 3/4" skirt or the 2 " skirt or you can change the thickness of the tube at the nose by changing the nose insert.

We will have the separate pieces up on the site by Monday morning.
Each mold takes 3 pieces but you can combine any size of the pieces from eother of the 3 molds. Hope this helps

Thanks Bear,
I'll check out your site Monday.
H20 Dawg ><>

Bear,
I looked at your site today about the skirt mandrils for the tube molds. I am still confused. There's a picture for 1 3/4, 2 , and 2 1/4. In all three pictures there are three mandrils. Do you get three mandrils for that price or are those the same pictures (showing the three sizes) and you only get one mandril?

It all looks good but, oh my goodness! if I calculated right it would be $150 for the 1 cavity mold with the different components. I wouldn't live long enough for a pay back unless I could find some guys to share.

That is just 1 picture of the mandrels. The mandrel cost is each. I know this mold is expensive but we have customers that wanted it. There is a lot of machine work on this mold. Sorry Dayne

nice