Hey All,

I have a used MinnKota 3X hand control that is 101# thrust 52 inch shaft (or 54" I forget) that I would trade for a smaller motor, (prefer 65, 74, or 80# thrust)

This is a 36 volt motor and I would prefer a 24 volt motor.

I have used it on a 18.5 procraft for a year or two and got it used but in good condition.

It does have some scrapes and dings and it is used but not trashed and everything works including the directional light.

I just do not need a 101# thrust motor on this little boat. It does make it haul azzz when I want to but it is overkill.

I need a smaller motor either hand or foot control. Prefer MinnKota but will take a motorguide if the right one. I still prefer hand control but like I said will listen to all offers.

If you have one send me a PM. I can get pics if needed. Not a perfect looking motor at all but very mechanically sound.

Regards

I have a 67lb hand control motorguide that I will let go for $300. It was on my pontoon boat and works very good. Has a couple of scrapes but it would push that pontoon around without a problem. I needed a shorter shaft that is why I took it off. Have a 70lb foot control powerdrive that is only 4 months old. I just like a foot control better but it works great. I will let it good for $450. If you like one just tell me and I will send pics. Steve

PM sent

Pms returned,

Hey SSfireman, really just looking to trade.

Regards

send me some pics to chrismendenall1587@yahoo.com. I may be interested in trading you. I have a motorguide 67lb thrust hand control that is a 12/24 volt and I also have a 43lb thrust motor guide 12 volt. I may swap you two for one.