Forums59
Topics1,039,271
Posts13,962,003
Members144,197
|
Most Online39,925 Dec 30th, 2023
|
|
Boat trailer brakes
#12865040
08/15/18 04:21 PM
|
Joined: Dec 2007
Posts: 455
DUNCAN553
OP
Angler
|
OP
Angler
Joined: Dec 2007
Posts: 455 |
Ok so I have a general question about boat trailer brakes. I have noticed the last two times I have pulled my boat that my truck and trailer will "serge" forward and back when driving down the road. At first I thought it was due to hitting bumps but today I noticed that it would happen even when I was just going down the street without hitting any bumps and with the trailer having a forward pull going on. So it wasn't a case of the trailer going forward and engaging the brakes. It feels like the brakes are trying to engage and disengage on their own. Does that mean that I need new pads, need to bleed the system, check the front part of trailer where the brake system is at and didn't see anything out of place? Any thoughts about how to fix or where to take to get fixed would be great.
2006 Skeeter duel axel trailer. Never had any work done to brakes but only take it out a couple times a year.
Thanks in advance.
"When the character of a man is not clear to you, look at his friends."
|
|
Re: Boat trailer brakes
[Re: DUNCAN553]
#12865123
08/15/18 05:03 PM
|
Joined: Feb 2006
Posts: 3,774
bronco71
TFF Team Angler
|
TFF Team Angler
Joined: Feb 2006
Posts: 3,774 |
could be the shock absorber needs replaced, wouldn't hurt to bleed the brakes to see if it helps....
1987 Nitro MX185/Mercury Black Max 150 1999 Triton TX21/225 Mercury Optimax
|
|
Re: Boat trailer brakes
[Re: DUNCAN553]
#12865323
08/15/18 07:50 PM
|
Joined: Dec 2006
Posts: 3,292
Dayne
TFF Team Angler
|
TFF Team Angler
Joined: Dec 2006
Posts: 3,292 |
I'd check the brake fluid first then the actuator on the trailer tongue. On a boat that old it may need to be replaced. I had a 2001 Champion and had to rebuild the actuator 2 times then replace it.
|
|
Re: Boat trailer brakes
[Re: DUNCAN553]
#12865546
08/15/18 11:18 PM
|
Joined: Dec 2007
Posts: 455
DUNCAN553
OP
Angler
|
OP
Angler
Joined: Dec 2007
Posts: 455 |
Thanks for the info. I will look at the brake fluid to make sure it is full. I am guessing it is not and that they need to be bleed. I did not even know that it had fluid in them until today after advise and I started looking into it. Looks like I can do the bleeding myself. Thanks again for the info. I will let everyone know if it helps.
"When the character of a man is not clear to you, look at his friends."
|
|
Re: Boat trailer brakes
[Re: DUNCAN553]
#12865919
08/16/18 10:24 AM
|
Joined: Apr 2008
Posts: 2,324
trlrman
Extreme Angler
|
Extreme Angler
Joined: Apr 2008
Posts: 2,324 |
You did not say if the brakes were drum or disc ?I would also jack up the trailer and shake ,tug ,pull and spin the wheels listening for noise that could be something loose that maybe dragging or binding then releasing giving you the "surge"
|
|
Re: Boat trailer brakes
[Re: DUNCAN553]
#12868722
08/18/18 09:20 PM
|
Joined: Jul 2012
Posts: 524
PhishWhisperer
Pro Angler
|
Pro Angler
Joined: Jul 2012
Posts: 524 |
If your brakes are drum-type and you fish in brackish water your pads might be corroded out. Might be good to pull off the wheels and check. When I checked mine they were essentially gone! I removed all the parts down to the backing plate, cleaned everything up, and put the wheels back on! I drive conservatively and truck stops the boat fine.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|