Forums59
Topics1,038,952
Posts13,956,326
Members144,183
|
Most Online39,925 Dec 30th, 2023
|
|
Replaced in hull transducer, but
#12819398
07/07/18 03:33 PM
|
Joined: Feb 2011
Posts: 2,017
sprigsss
OP
Extreme Angler
|
OP
Extreme Angler
Joined: Feb 2011
Posts: 2,017 |
Replaced my in hull transducer and have y cable with my side imaging transducer.
Issue is I really only need in Hull when on plane. When idling the side imaging transducer gives much better sonar.
The thru Hull will mark the bottom but nothing else. It never lost the bottom even when running river channel at Amistad. But I could be sitting over grass and never see it on sonar.
I would disconnect y cable and connect side imaging transducer directly to bird and suddenly I have grasss and fish on screen.
Any options besides picking which one is more important to me at the time?
Would like to have depth reading while on plane but take advantage of the side imaging transducer when not on plane.
Have 1198c at console.
|
|
Re: Replaced in hull transducer, but
[Re: sprigsss]
#12819523
07/07/18 06:21 PM
|
Joined: Feb 2010
Posts: 12,111
shut-up-and-fish
TFF Guru
|
TFF Guru
Joined: Feb 2010
Posts: 12,111 |
When utilizing an in-hull transducer and "Y" cable your 2D and depth are dedicated to the in-hull transducer.
I rely on my charts to tell me my depth and utilize the 2D sonar in the SI transducer.
www.shut-up-and-fish.comFrom *Sales, *Installation Services, and *On the shop floor Education & Instructional Tips We have you covered here @ shut-up-and-fish for all of your Humminbird, Lowrance, Garmin, Minn Kota & Motorguide needs plus much more - Call Now 972 822 9285
|
|
Re: Replaced in hull transducer, but
[Re: sprigsss]
#12819595
07/07/18 07:32 PM
|
Joined: Nov 2010
Posts: 5,099
Wayne P.
TFF Celebrity
|
TFF Celebrity
Joined: Nov 2010
Posts: 5,099 |
Replaced my in hull transducer and have y cable with my side imaging transducer.
Issue is I really only need in Hull when on plane. When idling the side imaging transducer gives much better sonar.
The thru Hull will mark the bottom but nothing else. It never lost the bottom even when running river channel at Amistad. But I could be sitting over grass and never see it on sonar.
I would disconnect y cable and connect side imaging transducer directly to bird and suddenly I have grasss and fish on screen.
Any options besides picking which one is more important to me at the time?
Would like to have depth reading while on plane but take advantage of the side imaging transducer when not on plane.
Have 1198c at console. The quality of sonar with a shoot-thru is only as good as the installation and hull condition. Properly installed there is very little signal loss. How well did the shoot-thru perform during testing BEFORE it was bonded to the hull?
Helix 12 CHIRP MEGA SI+ GPS G3N and G4N, 1198c SI, SOLIX 10 SI G3, Helix 8 MEGA SI+ GPS G4N, SOLIX 12 SI and G3, MEGA 360, MEGA LIVE TL, RC-1
|
|
Re: Replaced in hull transducer, but
[Re: sprigsss]
#12824269
07/11/18 04:44 PM
|
Joined: Nov 2002
Posts: 4,439
Gamblinman
TFF Team Angler
|
TFF Team Angler
Joined: Nov 2002
Posts: 4,439 |
For an in-hull transducer to operate correctly, you must be down to the last layer of fiberglass/gelcoat before attaching. The thicker the glass it has to transmit and receive thru, the weaker the return.
My Gambler has an inner and outer hull. You have to drill thru the inner hull and remove some of the outer hull to get the best results.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|