Main Menu
Newest Members
SneakySnake, Jrittie, Jskuehne, rontatum, dewbassbite
108404 Registered Users
Top Posters
TexDawg 89101
hopalong 78895
Pilothawk 76590
John175® 68093
JDavis7873® 67391
FattyMcButterpants 60904
Derek 🐝 60651
Tritonman 58109
LoneStarSon® 54588
SkeeterRonnie 53476
Forum Stats
108404 Members
61 Forums
777160 Topics
10024183 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#12823880 - 07/11/18 02:32 AM Simrad total scan questions.
Lloper Offline
Green Horn

Registered: 03/11/15
Posts: 8
I have a 7 inch simrad Indash hooked up to a through hull transducer. Just above it I have another 7 inch simrad with total scan transducer. Can you link them together off the total scan transducer and run one with side scan and the other with gps and down scan. Running low range 7 at bow with terrova 112. Transducer on front is hooked up to built in transducer. What settings do I have to run on the lowrance. What are my options.
I’ve been told that you can’t run downscan chirp and side imaging at the same time. I know there are some knowledgeable electronics gurus on the site that will have the answer. Thanks in advance.

#12824070 - 07/11/18 08:55 AM Re: Simrad total scan questions. [Re: Lloper]
Jason Gilstrap Offline
Mr. Lowrance

Registered: 07/03/03
Posts: 3251
Loc: Tulsa, OK
Does your 7 inch have a ethernet port, if so.. yes you can share sonar between your to simrad units.
Jason Gilstrap LOWRANCE PRO STAFF / Get A Limit Outdoors


© 1998-2018 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide