Main Menu
Newest Members
fatdad74, BigGeorgeTX, GeauxDeeper, dmat, Junnhb
109171 Registered Users
Top Posters
TexDawg 89978
hopalong 78900
Pilothawk 77362
John175® 69659
JDavis7873® 67392
Derek 🐝 61583
FattyMcButterpants 60906
Tritonman 58353
LoneStarSon® 54781
Mark Perry 54408
Forum Stats
109171 Members
60 Forums
775096 Topics
9972480 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#12807912 - 06/27/18 03:29 PM Fishmaster 350 float tube inner tube size?
Fishin14 Offline
Green Horn

Registered: 06/27/18
Posts: 1
Good afternoon!
Google did not turn up anything, so hoping someone here may have some history or one still in action.
Recently acquired a fishmaster 350 float tube “shell” but no inner tube.
Anyone know what size inner tube the 350 uses?
If no one knows, I can get some ID/OD measurements and hope that gets me close enough to the right size.
Just don’t want to get the wrong size and put too much stress on the seems and shorten the life of the tube.
Thanks for any help you can provide!

#12815747 - 07/03/18 11:25 PM Re: Fishmaster 350 float tube inner tube size? [Re: Fishin14]
JackCaster Offline

Registered: 03/31/08
Posts: 246
Loc: Mckinney, TX
Contact ODP Tubes in OKC. They purchased the company that made original Fishmaster tubes. Their contact info is 855-354-7461. Tell them your story and what you need. Good people, should be able to solve your problem.


© 1998-2018 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide