Main Menu
Newest Members
Eldorado, SteveWC, Tickle, Stephen Brocious, Tstone1
107984 Registered Users
Top Posters
TexDawg 88586
hopalong 78895
Pilothawk 76385
John175® 67540
JDavis7873® 67390
FattyMcButterpants 60868
Derek 🐝 60236
Tritonman 57987
LoneStarSon® 54394
SkeeterRonnie 53365
Forum Stats
107984 Members
60 Forums
860757 Topics
12268745 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#12736213 - 04/30/18 07:12 AM Motor guide Questionj
Cypress Springs Guy Offline
Green Horn

Registered: 02/13/17
Posts: 10
Have an older motor guide digital. The steering cable slipped out of the foot pedal. I pushed the pedal down at the back and attached the wire through the little hole. Now the cable is so tight I can’t push the pedal down or forward. Any ideas. Thanks

#12736236 - 04/30/18 07:39 AM Re: Motor guide Questionj [Re: Cypress Springs Guy]
T Bird Online   content
TFF Celebrity

Registered: 03/07/10
Posts: 6060
Loc: Temple, Texas "Rail Town USA"
Should have cable tension adjustment points on front of foot pedal. Procedure is in owners manual.

#12736393 - 04/30/18 09:10 AM Re: Motor guide Questionj [Re: Cypress Springs Guy]
ssmith Online   content
TFF Team Angler

Registered: 11/22/07
Posts: 3285
Loc: scotland tx
pull the top cap off the motor shaft it may have slipped off the turning drum when the cable had slack in it.


© 1998-2018 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide