Forums59
Topics1,038,942
Posts13,955,998
Members144,183
|
Most Online39,925 Dec 30th, 2023
|
|
Prop and or Jack Plate recommendations / experience...
#12634158
02/18/18 07:17 PM
|
Joined: Jun 2016
Posts: 394
markson
OP
Angler
|
OP
Angler
Joined: Jun 2016
Posts: 394 |
I am running a Yamaha VMAX SHO 200 HP on a Skeeter ZX200. I banged up the prop and was thinking about purchasing a second one as a spare. Currently spinning a 23-TI 15 1/8 VMAX SHO prop. The issue is I have hung an extra 23 lbs of equipment on the bow from stock and have noticed a decrease in lift and speed at WOT. Should I consider a different prop for the spare or a different height on the jack plate or both. Please share your experience and advice for this issue...Thanks!
|
|
Re: Prop and or Jack Plate recommendations / experience...
[Re: markson]
#12634167
02/18/18 07:27 PM
|
Joined: Mar 2010
Posts: 25,798
T Bird
TFF Guru
|
TFF Guru
Joined: Mar 2010
Posts: 25,798 |
I would give Skeeter a call for recommendations. Will probably need to know your RPM and Water Pressure at WOT along with current motor height below pad.
Okie by birth, Texan by choice. USAF "Thunderbirds" Alumni 1985-1989
|
|
Re: Prop and or Jack Plate recommendations / experience...
[Re: T Bird]
#12634170
02/18/18 07:30 PM
|
Joined: Jun 2016
Posts: 394
markson
OP
Angler
|
OP
Angler
Joined: Jun 2016
Posts: 394 |
I have had zero luck in contacting anyone at Skeeter, always get voice mail and never get a call back. I was hoping maybe someone here had some direct experience / advice on this issue. Current RPM is 5950 (which really has not changed with the added weight), I will have to check water pressure. What should the pressure read at WOT?
Last edited by markson; 02/18/18 07:32 PM.
|
|
Re: Prop and or Jack Plate recommendations / experience...
[Re: markson]
#12634378
02/18/18 10:46 PM
|
Joined: Jan 2005
Posts: 16,921
Pat Goff
TFF Guru
|
TFF Guru
Joined: Jan 2005
Posts: 16,921 |
Steves prop at fork will take care of you.
Pat Goff Seadrift TX
|
|
Re: Prop and or Jack Plate recommendations / experience...
[Re: markson]
#12635033
02/19/18 01:47 PM
|
Joined: Aug 2006
Posts: 7,182
steve@S2Marine
TFF Celebrity
|
TFF Celebrity
Joined: Aug 2006
Posts: 7,182 |
height is 2 3/4" below pad.
that boat normally runs a 25p prop. if your having an issue with that 23p running with any good bow lift, it's probably because the 23 needs to have some tip cup put in it. that will solve most of your issues.
Last edited by steve@hydrodynamics; 02/19/18 02:45 PM.
|
|
Re: Prop and or Jack Plate recommendations / experience...
[Re: markson]
#12635132
02/19/18 02:39 PM
|
Joined: Aug 2016
Posts: 1,476
T-racer @ Mallard Marine
Extreme Angler
|
Extreme Angler
Joined: Aug 2016
Posts: 1,476 |
Talk to Steve^ and josh. Theyll get you figured out.
Mallard Marine Nacogdoches, Tx 936-225-3244 - Authorized Sales/Service Mercury Outboards - Allison Boats
|
|
Re: Prop and or Jack Plate recommendations / experience...
[Re: markson]
#12636264
02/19/18 11:56 PM
|
Joined: Apr 2015
Posts: 1,818
Curtbass
Extreme Angler
|
Extreme Angler
Joined: Apr 2015
Posts: 1,818 |
ELITE POWER SYSTEMS/ Elite Fishing Products Lithium Battery & Charging Systems, Soft Plastics, Tackle,Tokyo Rigs Tight lines & stay safe out there.Gods blessings
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|