Forums59
Topics1,039,183
Posts13,960,515
Members144,192
|
Most Online39,925 Dec 30th, 2023
|
|
Need help from a wiring expert-Lowrance
#12631649
02/16/18 08:54 PM
|
Joined: Sep 2014
Posts: 482
LO419
OP
Angler
|
OP
Angler
Joined: Sep 2014
Posts: 482 |
Going to help a friend install a HDS-8 Gen 2, LSS-2 ducer and structure scan box. Don’t want to put a switch in to turn box on and off. HDS will have power cord run directly to the battery, can we hook the yellow wire from HDS and structure box together and call it good or do we still need to run the pos/neg leads from the structure box to the battery as well? Any help would be appreciated.
Mike LO419
|
|
Re: Need help from a wiring expert-Lowrance
[Re: LO419]
#12632634
02/17/18 02:27 PM
|
Joined: Mar 2010
Posts: 25,824
T Bird
TFF Guru
|
TFF Guru
Joined: Mar 2010
Posts: 25,824 |
Doing either will leave the structure box powered 24/7. Probably not a good idea.
Okie by birth, Texan by choice. USAF "Thunderbirds" Alumni 1985-1989
|
|
Re: Need help from a wiring expert-Lowrance
[Re: LO419]
#12632775
02/17/18 04:12 PM
|
Joined: May 2009
Posts: 978
MAK747
Pro Angler
|
Pro Angler
Joined: May 2009
Posts: 978 |
The structurescan module needs the Pos and Neg wires connected to the battery. The yellow wire is the 'wakeup' wire. You can connect it to the HDS yellow wire and any time that the HDS is powered on it will apply +12V to the yellow wire which will power on the structurescan module. You could also connect the SS module yellow wire to +12V through a switch which would allow you to power on/off the module whenever you wanted.
Last edited by MAK747; 02/17/18 04:13 PM.
|
|
Moderated by banker-always fishing, chickenman, Derek ðŸ, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|