Forums59
Topics1,037,834
Posts13,935,305
Members144,150
|
Most Online39,925 Dec 30th, 2023
|
|
360 sonar, what is the difference between the Ultrex version and normal version?
#12625156
02/13/18 12:39 PM
|
Joined: Jan 2013
Posts: 6,950
crapicat
OP
TFF Celebrity
|
OP
TFF Celebrity
Joined: Jan 2013
Posts: 6,950 |
I have been researching 360...seems, brackets are different. Just wondering if the shaft length is different on the Ulterra version. I will be attempting to mount a 360 to a terranova with a 60 inch shaft.
One other item...I am wondering if I need to keep my si/Di transducer on the troller (or remove it?
Any assistance would be greatly appreciated.
Last edited by crapicat; 02/13/18 02:53 PM.
|
|
Re: 360 sonar, what is the difference between the Ulterra version and normal version?
[Re: crapicat]
#12625313
02/13/18 02:35 PM
|
Joined: Nov 2010
Posts: 5,090
Wayne P.
TFF Celebrity
|
TFF Celebrity
Joined: Nov 2010
Posts: 5,090 |
There is no Ulterra version. There is no Humminbird mount for a Terrova, Ulterra, or any other similar motor.
Helix 12 CHIRP MEGA SI+ GPS G3N and G4N, 1198c SI, SOLIX 10 SI G3, Helix 8 MEGA SI+ GPS G4N, SOLIX 12 SI and G3, MEGA 360, MEGA LIVE TL, RC-1
|
|
Re: 360 sonar, what is the difference between the Ulterra version and normal version?
[Re: Wayne P.]
#12625340
02/13/18 02:52 PM
|
Joined: Jan 2013
Posts: 6,950
crapicat
OP
TFF Celebrity
|
OP
TFF Celebrity
Joined: Jan 2013
Posts: 6,950 |
Ok, Ultrex then...didnt you tell me that Cumberland had such a mount, for a Terranova?
Last edited by crapicat; 02/13/18 02:54 PM.
|
|
Re: 360 sonar, what is the difference between the Ulterra version and normal version?
[Re: crapicat]
#12625706
02/13/18 05:50 PM
|
Joined: Nov 2010
Posts: 5,090
Wayne P.
TFF Celebrity
|
TFF Celebrity
Joined: Nov 2010
Posts: 5,090 |
Yes I did, but it doesn't use the Ultrex or Fortrex mount, just the 360 pole inside the apparatus.
Helix 12 CHIRP MEGA SI+ GPS G3N and G4N, 1198c SI, SOLIX 10 SI G3, Helix 8 MEGA SI+ GPS G4N, SOLIX 12 SI and G3, MEGA 360, MEGA LIVE TL, RC-1
|
|
Re: 360 sonar, what is the difference between the Ulterra version and normal version?
[Re: crapicat]
#12627485
02/14/18 03:54 PM
|
Joined: Jul 2014
Posts: 4,340
Bobby Milam
TFF Team Angler
|
TFF Team Angler
Joined: Jul 2014
Posts: 4,340 |
On the mount, you will tell the company you are ordering from the shaft length of the trolling motor and they will send you a mount made for that.. As Wayne stated, you will take the 360 shaft off of the original 360 mount and use just the shaft portion. It slides inside of the new mount's shaft.
You will need another transducer other than the 360 to get the depth and temp readings. That can be a US2 built in transducer if available, your SI transducer mounted on the trolling motor or a transducer on the transom as long as the units are linked together but that would be the least desirable route because the depth will be different at the back as opposed to the front of the boat. Your SI transducer on the TM will have no ill effects on the 360 as long as the cable is mounted where it will not interfere with the 360 mount while the TM rotates. If it is an older Terrova, it has a built in slot that can be used. If it is a newer model or an ulterra, you would have to adapt it in some way to keep it separated. I use a portion of a coiled air line that my transducer is taped to which gives it the length to extend into the water and retract on stowing. There are youtube videos of different options that people have come up with.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|