Main Menu
Newest Members
Texas Torpedo, WTXBA806, robbiehoover, texasggm, bassjerker112
108879 Registered Users
Top Posters
TexDawg 89598
hopalong 78895
Pilothawk 76933
John175ģ 68871
JDavis7873ģ 67392
Derek 🐝 61275
FattyMcButterpants 60904
Tritonman 58258
LoneStarSonģ 54732
SkeeterRonnie 53597
Forum Stats
108879 Members
60 Forums
832830 Topics
12101225 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#12566638 - 01/06/18 04:54 PM Peco Hallicrafters circuitboard
Diablosandwich Offline
Pro Angler

Registered: 04/10/08
Posts: 629
Loc: 7 Ft. from the Coast
2003 Fishmaster manufactured by Polar/Dynasty. Iím in search of a peco hallicrafters circuit board that was used on the backside of the 6 rocker switch panel. Iíve lost two female connections due to corrosion.
Iíve searched the internet and was hoping someone could provide me with a place to find a replacement and the reason a circuit board was used.
Found where this was used in sailboats manufactured around this time, also.
Can anyone shed some light on this?
VHF 16/68

#12568692 - 01/08/18 09:34 AM Re: Peco Hallicrafters circuitboard [Re: Diablosandwich]
gary purdy Offline
TFF Guru

Registered: 05/24/03
Posts: 11468
Loc: Littlefield Tx & Lake A. H. US...
I have converted 2 of those printed circuit switchboards to a standard switchboard. You can remove the 2 items control through the 2 bad terminals from that board and go directly to the switch with a fused + wire. No idea why they thought it would be better using automotive printed circuit technology.
The world will not be destroyed by those who do evil, but by those who watch them without doing anything. Remember what He has done and remember that He is not done yet!-- GOD IS GOOD


© 1998-2018 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide