Main Menu
Newest Members
crobalo, Ecwfishing, Keithorr, wclopton, lazypineapple
109061 Registered Users
Top Posters
TexDawg 89808
hopalong 78895
Pilothawk 77210
John175® 69342
JDavis7873® 67392
Derek 🐝 61483
FattyMcButterpants 60906
Tritonman 58328
LoneStarSon® 54755
Mark Perry 54063
Forum Stats
109061 Members
60 Forums
781392 Topics
10105638 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#12493381 - 11/05/17 06:01 PM tuning a prop
Joefishhunter Offline

Registered: 03/30/15
Posts: 150
Loc: DFW
I just bought a new fury 4 blade 25 pitch for my pantera 2. It has the holes in the prop to help the hole shot. How do you go about setting it up? The vent plugs..
I never lie. I just never tell the whole truth lol

#12493467 - 11/05/17 06:51 PM Re: tuning a prop [Re: Joefishhunter]
grout-scout Online   content
TFF Celebrity

Registered: 12/08/08
Posts: 7192
Loc: Boerne, Texas
You should not need any plugs with a fury 4. If you blow out on takeoff (which fury don’t do) then you add a plug to the prop (several sizes to try). If it still blows out after adding 1 plug, then add another plug. The plugs are only applicable during the holeshot, they have no affect on top end.

#12493675 - 11/05/17 08:43 PM Re: tuning a prop [Re: Joefishhunter]
Gamblinman Offline
TFF Team Angler

Registered: 11/26/02
Posts: 3679
Loc: Yantis, TX
First thing is to get the prop height set to maintain recommended water pressure at speed. Once that is set, then determine if you have blow out on holeshot. Add plugs till the prop no longer blows out on holeshot. I use solid plugs and just drill them to fine tune. I find this easier than removing and changing out sizes.

#12497811 - 11/09/17 09:09 AM Re: tuning a prop [Re: Joefishhunter]
Curtbass Offline
Extreme Angler

Registered: 04/17/15
Posts: 1648
^^^^Gamblinmans idea on plugs.^^^^ Easier dialing in setup
92' ChampioN 201DCR Elite
13' Yamaha250SHO


© 1998-2018 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide