Forums59
Topics1,039,218
Posts13,961,133
Members144,196
|
Most Online39,925 Dec 30th, 2023
|
|
Re: I know this has probably....
[Re: Dicster]
#12460345
10/10/17 01:08 PM
|
Joined: Aug 2011
Posts: 2,543
pelican
Extreme Angler
|
Extreme Angler
Joined: Aug 2011
Posts: 2,543 |
I hate to say it but you probably just wasted your money. You'll kill that battery too.
Most people just want to hear "I use the BENFORD 2000 and it works great" but they don't realize that guy is using a FF that draws .4-.7 amps and yours draws 1.0 amps so you won't get the same run time and will kill the battery by trying to go 10 hours on it. Getting the "CORRECT" size battery and not running below 80% will greatly increase the life out of them. Interested in this topic, how do you determine the correct size? You need to total your total load (amp draw) and how many hours you want to run. Amp Load x run time x 1.5. This will get you in the ball park. Always over size your batt by at least 50%.
I've never been good, But I've been Lucky! I don't Lie or Exaggerate, but sometimes I remember BIG!
|
|
Re: I know this has probably....
[Re: pelican]
#12460449
10/10/17 02:34 PM
|
Joined: Jan 2011
Posts: 3,686
Todd™
TFF Team Angler
|
TFF Team Angler
Joined: Jan 2011
Posts: 3,686 |
I hate to say it but you probably just wasted your money. You'll kill that battery too.
Most people just want to hear "I use the BENFORD 2000 and it works great" but they don't realize that guy is using a FF that draws .4-.7 amps and yours draws 1.0 amps so you won't get the same run time and will kill the battery by trying to go 10 hours on it. Getting the "CORRECT" size battery and not running below 80% will greatly increase the life out of them. Interested in this topic, how do you determine the correct size? You need to total your total load (amp draw) and how many hours you want to run. Amp Load x run time x 1.5. This will get you in the ball park. Always over size your batt by at least 50%. This^ It would be great if they could put a sticky post on this subject in the rigging section.
|
|
Re: I know this has probably....
[Re: Shaun Russell]
#12460456
10/10/17 02:40 PM
|
Joined: Jan 2011
Posts: 3,686
Todd™
TFF Team Angler
|
TFF Team Angler
Joined: Jan 2011
Posts: 3,686 |
I hate to say it but you probably just wasted your money. You'll kill that battery too.
Most people just want to hear "I use the BENFORD 2000 and it works great" but they don't realize that guy is using a FF that draws .4-.7 amps and yours draws 1.0 amps so you won't get the same run time and will kill the battery by trying to go 10 hours on it. Getting the "CORRECT" size battery and not running below 80% will greatly increase the life out of them. Todd did I make a mistake getting the battery I got? It appears too small also. Yours appears to be rated at .8 amp draw. That's probably max and will run slightly lower but that's the number I use. A good lithium battery setup will have a safety shut off to keep it from dropping below critical voltage. Yours probably has one so I don't think you will get many hours out of it before it shuts down. Not an entire tournament day.
|
|
Re: I know this has probably....
[Re: shut-up-and-fish]
#12460462
10/10/17 02:42 PM
|
Joined: Jan 2011
Posts: 3,686
Todd™
TFF Team Angler
|
TFF Team Angler
Joined: Jan 2011
Posts: 3,686 |
Thanks for all the replies. I went with the nocqua 10ah battery.
You could buy another one and wire them parallel to double the amp hour.
|
|
Moderated by banker-always fishing, chickenman, Derek ðŸ, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|