Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
TAMU13, Mariajohn, Tocatta, DieselRX, Reed Cullum
106142 Registered Users
Top Posters
TexDawg 86630
hopalong 78748
Pilothawk 75360
JDavis7873® 67383
John175 ® 65454
FattyMcButterpants 60793
Derek 🐝 58686
Tritonman 57667
LoneStarSon® 53540
SkeeterRonnie 53057
facebook
Forum Stats
106142 Members
60 Forums
807451 Topics
10205415 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#12450885 - 10/02/17 09:34 PM Plugs for Raker II prop?
ToadThrower Online   content
Angler

Registered: 06/29/07
Posts: 368
Loc: Arlington, TX
Anyone know where I can find plugs for the holes in my Raker II prop...prop slips a little too much ...it has 3 holes in the hub about 5/8 inch each or suggestions on how to make plugs for them...appreciate any help...


Edited by ToadThrower (10/02/17 09:34 PM)

Top
#12451312 - 10/03/17 09:42 AM Re: Plugs for Raker II prop? [Re: ToadThrower]
gary purdy Offline
TFF Guru

Registered: 05/24/03
Posts: 11163
Loc: Littlefield Tx & Lake A. H. US...
JB Weld for metal.
_________________________
The world will not be destroyed by those who do evil, but by those who watch them without doing anything. Remember what He has done and remember that He is not done yet!-- GOD IS GOOD

Top
#12451342 - 10/03/17 09:56 AM Re: Plugs for Raker II prop? [Re: ToadThrower]
NITRO Z8 Online   content
Pro Angler

Registered: 07/06/07
Posts: 555
Loc: fortworth tx, tarrant co.
Try B&B prop's on rufe snow.

Top
#12451406 - 10/03/17 10:45 AM Re: Plugs for Raker II prop? [Re: NITRO Z8]
ToadThrower Online   content
Angler

Registered: 06/29/07
Posts: 368
Loc: Arlington, TX
Thanks for the suggestions...Gary on the JB weld any suggestions for how to fill that large hole..with the epoxy..I tried using JB weld with a grommet and it didn't hold..I will be visiting B and B so I will check with them too...

Top
#12451783 - 10/03/17 02:29 PM Re: Plugs for Raker II prop? [Re: ToadThrower]
steve@hydrodynamics Offline
TFF Celebrity

Registered: 08/25/06
Posts: 6770
Loc: Quitman,Tx
best is too get a shop to drill those hole out to accept the mercury pvs plugs.
_________________________
www.hydrodynamics-usa.com
903-763-5225





Top
#12451793 - 10/03/17 02:33 PM Re: Plugs for Raker II prop? [Re: steve@hydrodynamics]
ToadThrower Online   content
Angler

Registered: 06/29/07
Posts: 368
Loc: Arlington, TX
Thanks Steve do you know what size hole diameter that would be?...I am sure the prop shop would know but I think the current hole size maybe too large for the PVS plugs...

Top
#12451986 - 10/03/17 04:48 PM Re: Plugs for Raker II prop? [Re: ToadThrower]
gary purdy Offline
TFF Guru

Registered: 05/24/03
Posts: 11163
Loc: Littlefield Tx & Lake A. H. US...
Anytime you are using JB weld to fill, I always wait until it gets like soft clay before applying. The holes for vent plugs on Merc props have a machined flat so it can retain the insert. Merc vent plugs fit into a .690 hole
_________________________
The world will not be destroyed by those who do evil, but by those who watch them without doing anything. Remember what He has done and remember that He is not done yet!-- GOD IS GOOD

Top
#12453335 - 10/04/17 05:19 PM Re: Plugs for Raker II prop? [Re: gary purdy]
ToadThrower Online   content
Angler

Registered: 06/29/07
Posts: 368
Loc: Arlington, TX
Thanks for the tips and information Gary...

Top



© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide