Had my 17' lights on for several weeks on both sides of my boat. I went out to my boat this evening to flip on my green exterior lights and bask in the green glow and they didn't come on. Then looked down at them and it was gone... all 17'... went to the other side and same thing? I'm guessing them came off the last time I was fishing during the day. Weird they both came off at the same time.
Does anyone have any recommendations on lights with really good adhesive or a trick to sealing them on etc?
Im pretty sure they came off driving because where I spliced them together was inside the hull... both had the splice peace pulled outside the hole that penetrated the hull. I'll def try the alcohol prep next time. I didn't clean before I installed them..
The red backing 3M tape that you can get at any automotive store works really well. It is used to hold body molding on cars, and with proper prep, it will be damn near impossible to get off, unless you forcefully rip it off
Serj I really appreciate the offer. I ordered a roll that comes with 5M tape backing and I ordered some adhesive as well. The lights I ordered where 5050 LED's as opposed to the 3825's. Apparently the 5050 is a little brighter. I'll try to post a pic when I get them installed.