|
Forums59
Topics1,039,215
Posts13,961,057
Members144,196
| |
Most Online39,925
Dec 30th, 2023
|
|
 Sealing a screw hole in the hull?
#12430589
09/18/17 12:10 AM
|
Joined: Aug 2013
Posts: 26
Hardline43
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Aug 2013
Posts: 26 |
Previous owner installed a fire extinguisher with too long of screws and screwed them through the bottom of the boat. This is a 28 year old Skeeter. Not looking to take it to a Fiberglas shop. What would be best to reseal this with? Thanks
Last edited by Hardline43; 09/18/17 12:26 AM.
|
|
|
Re: Sealing a screw hole in the hull?
[Re: Hardline43]
#12430644
09/18/17 12:36 AM
|
Joined: Jun 2017
Posts: 416
sae
Angler
|
|
Angler
Joined: Jun 2017
Posts: 416 |
I would buya stainless steel screw ,a tight fit .use 5200 3 m adhesive and screw in hand tight.Let it cure 4 to 7
days . should last about 20 years.
|
|
|
Re: Sealing a screw hole in the hull?
[Re: Hardline43]
#12430662
09/18/17 12:48 AM
|
Joined: Jun 2008
Posts: 1,210
shotgunwilly
Extreme Angler
|
|
Extreme Angler
Joined: Jun 2008
Posts: 1,210 |
Remove the screw and use Marinetex.
|
|
|
Re: Sealing a screw hole in the hull?
[Re: Hardline43]
#12431115
09/18/17 02:18 PM
|
Joined: Apr 2015
Posts: 159
StratVoodoo
Outdoorsman
|
|
Outdoorsman
Joined: Apr 2015
Posts: 159 |
As others have mentioned, Marine-Tex is good. I prefer the Brownell's Acra-Glass kit epoxy. It's the kit designed for bedding rifle stocks. Stuff is tough as can be & can be dyed to color match. Repaired screw holes below the water line on an '89 Champion years ago and the repairs are still in tact and holding strong.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
