Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
NTHawg, Jacobo78, ACFishing, fishandgolf, Randy L Irby
108231 Registered Users
Top Posters
TexDawg 88884
hopalong 78895
Pilothawk 76459
John175® 67842
JDavis7873® 67390
FattyMcButterpants 60883
Derek 🐝 60465
Tritonman 58049
LoneStarSon® 54518
SkeeterRonnie 53417
facebook
Forum Stats
108231 Members
60 Forums
813827 Topics
10305935 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#12396427 - 08/22/17 01:07 PM Going to replace trim seals
EastTexasBassin Offline
Pro Angler

Registered: 07/15/09
Posts: 970
Loc: Lake Ray Hubbard
I'm going to replace my trim seals for the first time tomorrow morning. I got the seals and spanner wrench by mail today. Any words of wisdom from anyone that has done it before? My motor is a 1999 Yamaha 115 2 stroke. (C115TLRX)

Top
#12396470 - 08/22/17 01:47 PM Re: Going to replace trim seals [Re: EastTexasBassin]
rb7764 Offline
Extreme Angler

Registered: 01/08/04
Posts: 2075
Loc: Frisco, TX, USA
Raise motor all the way up to release pressure in system. Easy from there.

Top
#12396519 - 08/22/17 02:28 PM Re: Going to replace trim seals [Re: EastTexasBassin]
BrazosRiverTom Offline
Pro Angler

Registered: 12/15/12
Posts: 639
Loc: Mineral Wells, TX
I used a 2 X 6 board (cut to length needed to support the motor) with a V notch and rested the motor in that while I worked on the trim unit.

Top
#12396626 - 08/22/17 03:47 PM Re: Going to replace trim seals [Re: EastTexasBassin]
gary purdy Online   content
TFF Guru

Registered: 05/24/03
Posts: 11441
Loc: Littlefield Tx & Lake A. H. US...
Should have a built in lock to keep motor up.
_________________________
The world will not be destroyed by those who do evil, but by those who watch them without doing anything. Remember what He has done and remember that He is not done yet!-- GOD IS GOOD

Top
#12396629 - 08/22/17 03:48 PM Re: Going to replace trim seals [Re: EastTexasBassin]
Huckleberry Online   happy
TFF Guru

Registered: 10/10/07
Posts: 17749
Loc: Lake Gaston, VA
take it to a shop and let them do it .... words of wisdom.

Top
#12397506 - 08/23/17 09:29 AM Re: Going to replace trim seals [Re: EastTexasBassin]
Samarai Offline
Angler

Registered: 08/06/07
Posts: 433
Loc: houston, TX
good luck. if all else fails u can just knock the hell out of the caps and just get some replacement caps if the wrench wont budge.

Top
#12397880 - 08/23/17 01:09 PM Re: Going to replace trim seals [Re: EastTexasBassin]
EastTexasBassin Offline
Pro Angler

Registered: 07/15/09
Posts: 970
Loc: Lake Ray Hubbard
Woohoo! Got the caps off clean without damaging them at all. Not even a scratch. It was a pain in the a$$ to get the old seals out but I got the new ones in pretty easy. Refilled and bled the fluid and it works perfectly!

Top
#12398734 - 08/23/17 10:08 PM Re: Going to replace trim seals [Re: EastTexasBassin]
Freeman Clark Offline
Extreme Angler

Registered: 03/18/05
Posts: 1375
Loc: Temple, Texas
Good job and good luck with you repair.

Top



© 1998-2018 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide