Main Menu
Newest Members
OkieSooner, perla, Hammondegggs, Txsharpshot, Abasov Oleksii
109019 Registered Users
Top Posters
TexDawg 89758
hopalong 78895
Pilothawk 77170
John175® 69245
JDavis7873® 67392
Derek 🐝 61437
FattyMcButterpants 60906
Tritonman 58311
LoneStarSon® 54751
Mark Perry 53922
Forum Stats
109019 Members
60 Forums
830783 Topics
12097269 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#12325390 - 07/05/17 04:56 PM Help Wiring my new Minn Kota.
Scott Lindsey Offline

Registered: 07/21/04
Posts: 22
Loc: Dallas
I am struggling with the wiring. I am pretty sure it is wired Parallel which makes it 12 Volts. I have 4 wires coming to the BOW panel. Black Red Orange and White.
The old Johnson trolling motor had a three pin socket. Black Orange and Red:[/size]

The new Minn Kota has two Pin.

Coming from back of boat to the panel are the same 4 color wires. Red Black White Orange. They are wired to the panel as a switch that lets one CHARGE or TROLL.

What am i missing here? I cut the orange wire on back of the panel figuring that was part of the charge which I do not need anymore. I would love to route all straight to the SOCKET and bypass the switch but there are 4 wires.

This is for a 94 Cajun.

Thanks in advance!!

#12325482 - 07/05/17 05:50 PM Re: Help Wiring my new Minn Kota. [Re: Scott Lindsey]
Wayne P. Online   content
TFF Team Angler

Registered: 11/16/10
Posts: 4148
Loc: Charlottesville, Va
I had a similar 12/24V wiring setup with a Javelin I used to have.
PM sent with instructions
Humminbird Helix 12 CHIRP SI, 1198c SI, 1198c SI, ONIX 10 SI NT, Helix 7 CHIRP SI GPS G2, SOLIX 12 SI, 360, RC-1


© 1998-2018 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide