Mount pump close to the fuel tank. Connect the fuel inlet and outlet of the VRO pump together. Remove the VRO pump, oil tank, oil hoses and wires. Connect the red power wire of the electric fuel pump fused to the purple wire going to the VRO pump. Connect the black wire to any ground.
and ya end up with this..
I should have told him this needs a low pressure (2.5 to 5 psi) with a minimum of 42 gph, self-priming pump.
I have added a push pump at the tank like gary posted, the mr gasket pumps are not meant to pull fuel as far as I was from the tank.
follow garys directions and mix at 50:1