Forums59
Topics1,038,938
Posts13,955,886
Members144,183
|
Most Online39,925 Dec 30th, 2023
|
|
How do I fix this?
#12290488
06/12/17 09:14 PM
|
Joined: Dec 2016
Posts: 430
Too Fat 2 Fish
OP
Angler
|
OP
Angler
Joined: Dec 2016
Posts: 430 |
How I straighten the skeg on motor guide TM? filters%5Buser%5D=118982597&filters%5Brecent%5D=1&sort=1&o=0
Last edited by Too Fat 2 Fish; 06/12/17 09:31 PM.
|
|
Re: How do I fix this?
[Re: Too Fat 2 Fish]
#12290577
06/12/17 10:05 PM
|
Joined: Oct 2012
Posts: 1,925
smooth move
Extreme Angler
|
Extreme Angler
Joined: Oct 2012
Posts: 1,925 |
mine has been like that since the first time i had it in for warranty work, about 6 yrs ago. doesn't seem to bother the operation at all.
es le bon ton roulet
|
|
Re: How do I fix this?
[Re: Too Fat 2 Fish]
#12290601
06/12/17 10:19 PM
|
Joined: Aug 2009
Posts: 11,133
9094
TFF Guru
|
TFF Guru
Joined: Aug 2009
Posts: 11,133 |
I just bent mine back with a rubber mallet.
|
|
Re: How do I fix this?
[Re: smooth move]
#12290727
06/12/17 11:40 PM
|
Joined: Dec 2016
Posts: 430
Too Fat 2 Fish
OP
Angler
|
OP
Angler
Joined: Dec 2016
Posts: 430 |
mine has been like that since the first time i had it in for warranty work, about 6 yrs ago. doesn't seem to bother the operation at all. Friend from work broke his off and said he couldn't tell much difference before or after. But he has big 36v motor. I'm running a 42# motor on 20' boat. Need all the help I can get.
|
|
Re: How do I fix this?
[Re: 9094]
#12290739
06/12/17 11:48 PM
|
Joined: Dec 2016
Posts: 430
Too Fat 2 Fish
OP
Angler
|
OP
Angler
Joined: Dec 2016
Posts: 430 |
I just bent mine back with a rubber mallet. Was yours bent? Mine Doesn't seem to be. Looks like it just got spun out of line.
|
|
Re: How do I fix this?
[Re: Too Fat 2 Fish]
#12291153
06/13/17 03:56 AM
|
Joined: Dec 2009
Posts: 1,477
RANGER SKI
Extreme Angler
|
Extreme Angler
Joined: Dec 2009
Posts: 1,477 |
loosen the two bolts and turn it back straight. doe not look bent don't have to loosen bolts very much to turn.
|
|
Re: How do I fix this?
[Re: RANGER SKI]
#12291221
06/13/17 04:41 AM
|
Joined: Feb 2015
Posts: 4,724
Flippin-Out
TFF Team Angler
|
TFF Team Angler
Joined: Feb 2015
Posts: 4,724 |
loosen the two bolts and turn it back straight. doe not look bent don't have to loosen bolts very much to turn. THIS! For sure. Look closely. If it was bent, the point where the skeg attaches to the barrel of the motor would be directly below the shaft. It's not - the point of attachment has moved! ....the skeg isn't bent. The portion of the motor housing that has the skeg attached has rotated. Those two bolts should be at right angles to the TM shaft. Loosen them carefully, rotate it all back into alignment, and then carefully/equally re-snug those bolts. Don't crank down on them or you may trash the seal that keeps water out..... The motor housing is a cast aluminum alloy, and it's very brittle. If you wack it with anything, you stand a very good chance of breaking it.
Last edited by Flippin-Out; 06/13/17 04:43 AM.
|
|
Re: How do I fix this?
[Re: Too Fat 2 Fish]
#12291228
06/13/17 04:45 AM
|
Joined: Sep 2003
Posts: 5,519
Bruce's
TFF Celebrity
|
TFF Celebrity
Joined: Sep 2003
Posts: 5,519 |
You can tune the trolling motor by moving the s keg around till you find its sweet spot. As said above loosen the two screws ans move tot he best or quietest point.
Bruce's Sprinkler Repair 817-798-7246 52 years experience State Licensed Irrigation LI0017483
Fishing Texas lakes one at a time
|
|
Re: How do I fix this?
[Re: Bruce's]
#12294563
06/14/17 11:57 PM
|
Joined: Dec 2016
Posts: 430
Too Fat 2 Fish
OP
Angler
|
OP
Angler
Joined: Dec 2016
Posts: 430 |
Thanks for all the input. I tried loosening the 2 bolts a little but it won't budge. Not going to smack it with a hammer. Guess I'll just live with it.
|
|
Re: How do I fix this?
[Re: Bruce's]
#12294650
06/15/17 12:44 AM
|
Joined: Nov 2014
Posts: 23,370
SteezMacQueen
TFF Guru
|
TFF Guru
Joined: Nov 2014
Posts: 23,370 |
You can tune the trolling motor by moving the s keg around till you find its sweet spot. As said above loosen the two screws ans move tot he best or quietest point. This! And the service dept that worked on it may have set it that way because that was where it made the most torque and least noise.
Eat. Sleep. Fish.
|
|
Re: How do I fix this?
[Re: SteezMacQueen]
#12294854
06/15/17 02:22 AM
|
Joined: Aug 2011
Posts: 2,957
Bob Landry
Extreme Angler
|
Extreme Angler
Joined: Aug 2011
Posts: 2,957 |
You can tune the trolling motor by moving the s keg around till you find its sweet spot. As said above loosen the two screws ans move tot he best or quietest point. This! And the service dept that worked on it may have set it that way because that was where it made the most torque and least noise. Ot got the maximum RPM.
2015 Seaark 1872 MV CC Etec-90 Two Helix 12 CHIRP SI's, , MinnKota Riptide ST80/i-pilot Link, Bob's Hydraulic 2020 Robalo R200 CC, Yamaha 150
Bitter Gun Owner Bitter Clinger Armed Infidel
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|