Main Menu
Newest Members
Bowhunter2323, BankAngler81, CLove01, Chris Phillips, dac11011
107386 Registered Users
Top Posters
TexDawg 88111
hopalong 78894
Pilothawk 76180
JDavis7873® 67390
John175® 66800
FattyMcButterpants 60846
Derek 🐝 59754
Tritonman 57915
LoneStarSon® 54253
SkeeterRonnie 53295
Forum Stats
107385 Members
60 Forums
823839 Topics
10418127 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#12256224 - 05/21/17 07:39 PM TRANSDUCER REMOVAL
blackhorse Online   content

Registered: 05/13/08
Posts: 177
Loc: Morgan, Tx
bought a boat and have found out the transducer is mounted in some type of silicone or rubber
goo. need to take it out and epoxy back in. just wondering if there is easier way to do this
with damaging the transducer. thx

#12256526 - 05/22/17 12:53 AM Re: TRANSDUCER REMOVAL [Re: blackhorse]
jbobo Online   content
Extreme Angler

Registered: 02/26/13
Posts: 2850
Loc: springtown,tx.
If it's a type of rubber it should cut easily. Use a razor knife or sharp knife to cut between the td and gelcoat. Scrape the excess off both, sand gelcoat smooth, and clean well with alcohol then remount with epoxy.
22 ft. Wellcraft Deep V CC
Bridgeport/Eagle Mountain/Possum Kingdom/ Lake Texoma Home of the RonRig!


© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide