texasfishingforum.com logo
Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
Brad2587, C Man, Cameron Gose, Jetskirentals512, Flashin Assassin Lures
119183 Registered Users
Top Posters(All Time)
hopalong 121,070
TexDawg 119,800
Bigbob_FTW 95,347
John175☮ 85,918
Pilothawk 83,274
Bob Davis 82,396
Mark Perry 72,492
Derek 🐝 68,322
JDavis7873 67,416
Forum Statistics
Forums59
Topics1,038,938
Posts13,955,883
Members144,183
Most Online39,925
Dec 30th, 2023
Print Thread
Purging tilt and trim #12138564 03/13/17 02:37 PM
Joined: Jan 2006
Posts: 2,545
B
Biscuits Offline OP
Extreme Angler
OP Offline
Extreme Angler
B
Joined: Jan 2006
Posts: 2,545
I am regretting doing this now but I decided to change the fluid in my tilt and trim. I have a 1985 150hp Evinrude.

Are there any tricks to purging the air out? I have the motor locked in the up position. Added fluid, then lower the motor and cycling up and down with the button. I have to help the motor all the way down and then have to help the motor back up. I do this a few cycles then lock the motor back up and turn the cap to release the air. I have done this probably 20 times and am seeing no improvement. My back can't handle much more of this. Am I doing something wrong? Is there a way to force the fluid into the unit to remove the air?




Current Cylinder Index is 42.
Re: Purging tilt and trim [Re: Biscuits] #12139344 03/13/17 09:27 PM
Joined: May 2003
Posts: 11,586
gary purdy Offline
TFF Guru
Offline
TFF Guru
Joined: May 2003
Posts: 11,586
All up till it stops several times. Make sure you tightened the manual release.


The world will not be destroyed by those who do evil, but by those who watch them without doing anything. Remember what He has done and remember that He is not done yet!-- GOD IS GOOD
Re: Purging tilt and trim [Re: Biscuits] #12139511 03/13/17 11:34 PM
Joined: Jan 2006
Posts: 2,545
B
Biscuits Offline OP
Extreme Angler
OP Offline
Extreme Angler
B
Joined: Jan 2006
Posts: 2,545
Gary I'm not sure what you mean. Can you elaborate? Do you mean keep moving the motor up till all the air is out?




Current Cylinder Index is 42.
Re: Purging tilt and trim [Re: Biscuits] #12149282 03/20/17 04:58 PM
Joined: Jan 2006
Posts: 2,545
B
Biscuits Offline OP
Extreme Angler
OP Offline
Extreme Angler
B
Joined: Jan 2006
Posts: 2,545
The O-ring on the manual release was bad. Switched it out and back on the water.




Current Cylinder Index is 42.
Previous Thread
Index
Next Thread

© 1998-2022 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide
Powered by UBB.threads™ PHP Forum Software 7.7.3