Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
CJW, Fishhook91, Vasteel, A10 Warthog, Roger John
105461 Registered Users
Top Posters
TexDawg 85634
hopalong 78097
Pilothawk 74952
JDavis7873® 67382
John175 ® 64393
FattyMcButterpants 60667
Derek 🐝 58039
Tritonman 57517
LoneStarSon® 53065
SkeeterRonnie 52941
facebook
Forum Stats
105461 Members
60 Forums
848521 Topics
12093415 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#12138564 - 03/13/17 09:37 AM Purging tilt and trim
Biscuits Offline
Extreme Angler

Registered: 01/18/06
Posts: 2545
Loc: Medina Lake Tx
I am regretting doing this now but I decided to change the fluid in my tilt and trim. I have a 1985 150hp Evinrude.

Are there any tricks to purging the air out? I have the motor locked in the up position. Added fluid, then lower the motor and cycling up and down with the button. I have to help the motor all the way down and then have to help the motor back up. I do this a few cycles then lock the motor back up and turn the cap to release the air. I have done this probably 20 times and am seeing no improvement. My back can't handle much more of this. Am I doing something wrong? Is there a way to force the fluid into the unit to remove the air?
_________________________


Current Cylinder Index is 42.

Top
#12139344 - 03/13/17 04:27 PM Re: Purging tilt and trim [Re: Biscuits]
gary purdy Offline
TFF Guru

Registered: 05/24/03
Posts: 11086
Loc: Littlefield Tx & Lake A. H. US...
All up till it stops several times. Make sure you tightened the manual release.
_________________________
�The world will not be destroyed by those who do evil, but by those who watch them without doing anything� Remember what He has done and remember that He is not done yet! GOD IS GOOD

Top
#12139511 - 03/13/17 06:34 PM Re: Purging tilt and trim [Re: Biscuits]
Biscuits Offline
Extreme Angler

Registered: 01/18/06
Posts: 2545
Loc: Medina Lake Tx
Gary I'm not sure what you mean. Can you elaborate? Do you mean keep moving the motor up till all the air is out?
_________________________


Current Cylinder Index is 42.

Top
#12149282 - 03/20/17 11:58 AM Re: Purging tilt and trim [Re: Biscuits]
Biscuits Offline
Extreme Angler

Registered: 01/18/06
Posts: 2545
Loc: Medina Lake Tx
The O-ring on the manual release was bad. Switched it out and back on the water.
_________________________


Current Cylinder Index is 42.

Top



© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide