Forums59
Topics1,037,854
Posts13,935,657
Members144,150
|
Most Online39,925 Dec 30th, 2023
|
|
slow water pick up
#12018440
01/03/17 10:08 PM
|
Joined: Oct 2011
Posts: 179
four fingers
OP
Outdoorsman
|
OP
Outdoorsman
Joined: Oct 2011
Posts: 179 |
installed a water pump on my 2012 250 pro xs .It is slow to pick up water but seam to have decent pressure at wot 20psi.any idea why it would be slow to pick up water. I did not have the piece of plastic that sets the depth of the rubber bushing on the shaft.i don't want to hurt my motor so any help would be appricated
four fingers
|
|
Re: slow water pick up
[Re: four fingers]
#12018507
01/03/17 10:38 PM
|
Joined: Jul 2010
Posts: 1,336
boatman025
Extreme Angler
|
Extreme Angler
Joined: Jul 2010
Posts: 1,336 |
Could have trash in thermostats
Hughes Marine 3855 Osage Lane Wylie ,Texas
|
|
Re: slow water pick up
[Re: four fingers]
#12018663
01/03/17 11:57 PM
|
Joined: May 2003
Posts: 11,586
gary purdy
TFF Guru
|
TFF Guru
Joined: May 2003
Posts: 11,586 |
Could be the thermostats or the poppet needs service. http://www.boats.net/parts/search/Merc2/Mercury/250%20PRO%20XS%20%283.0L%20DFI%29/1B426561%20THRU%201B752546/Exhaust%20Plate/parts.html
The world will not be destroyed by those who do evil, but by those who watch them without doing anything. Remember what He has done and remember that He is not done yet!-- GOD IS GOOD
|
|
Re: slow water pick up
[Re: gary purdy]
#12028030
01/08/17 10:04 PM
|
Joined: Oct 2016
Posts: 536
Bulletman99
Pro Angler
|
Pro Angler
Joined: Oct 2016
Posts: 536 |
Could be the thermostats or the poppet needs service. http://www.boats.net/parts/search/Merc2/Mercury/250%20PRO%20XS%20%283.0L%20DFI%29/1B426561%20THRU%201B752546/Exhaust%20Plate/parts.html Thermostats catch all kinds of junk and will corrode up as will any metal (dissimilar metal corrosion) Pull it/them out and clean them and check for proper operation. The poppet valve works off pressure as well, so do not rule out. A couple years ago I was dealing with bouncing water pressure that turned out to be a bad gasket between the mount halves.
Last edited by Bulletman99; 01/09/17 01:44 AM.
Bullet 20XD Merc 250 ProXS
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|