Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
szunnyadtmacska, Ring The Bell, Krumfishing, Fishing is the best, rnger518
104794 Registered Users
Top Posters
TexDawg 84879
hopalong 77242
Pilothawk 74616
JDavis7873® 67382
John175 ® 63096
FattyMcButterpants 60665
Derek 🐝 57554
Tritonman 57447
SkeeterRonnie 52884
LoneStarSon® 52769
facebook
Forum Stats
104794 Members
60 Forums
841055 Topics
11999922 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#12018440 - 01/03/17 04:08 PM slow water pick up
four fingers Offline
Outdoorsman

Registered: 10/26/11
Posts: 148
Loc: conroe,texas
installed a water pump on my 2012 250 pro xs .It is slow to pick up water but seam to have decent pressure at wot 20psi.any idea why it would be slow to pick up water. I did not have the piece of plastic that sets the depth of the rubber bushing on the shaft.i don't want to hurt my motor so any help would be appricated
_________________________
four fingers

Top
#12018507 - 01/03/17 04:38 PM Re: slow water pick up [Re: four fingers]
boatman025 Offline
Angler

Registered: 07/16/10
Posts: 453
Loc: McKinney
Could have trash in thermostats
_________________________
Hughes Marine Service
McKinney ,Texas

Top
#12018663 - 01/03/17 05:57 PM Re: slow water pick up [Re: four fingers]
gary purdy Online   content
TFF Guru

Registered: 05/24/03
Posts: 10966
Loc: Littlefield Tx & Lake A. H. US...
Could be the thermostats or the poppet needs service. http://www.boats.net/parts/search/Merc2/Mercury/250%20PRO%20XS%20%283.0L%20DFI%29/1B426561%20THRU%201B752546/Exhaust%20Plate/parts.html
_________________________
“The world will not be destroyed by those who do evil, but by those who watch them without doing anything” Remember what He has done and remember that He is not done yet! GOD IS GOOD

Top
#12028030 - 01/08/17 04:04 PM Re: slow water pick up [Re: gary purdy]
Bulletman99 Offline
Angler

Registered: 10/26/16
Posts: 437
Loc: South Texas
Originally Posted By: gary purdy
Could be the thermostats or the poppet needs service. http://www.boats.net/parts/search/Merc2/Mercury/250%20PRO%20XS%20%283.0L%20DFI%29/1B426561%20THRU%201B752546/Exhaust%20Plate/parts.html


Thermostats catch all kinds of junk and will corrode up as will any metal (dissimilar metal corrosion) Pull it/them out and clean them and check for proper operation. The poppet valve works off pressure as well, so do not rule out. A couple years ago I was dealing with bouncing water pressure that turned out to be a bad gasket between the mount halves.


Edited by Bulletman99 (01/08/17 07:44 PM)
_________________________
Bullet 20XD
JSRE Modified Merc Promax

Finch Nasty Bait Co Pro Staff www.finchnastybaitco.com
Army Bass Anglers Coalition Pro Staff www.armybassanglers.com

Top



© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide