Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
cvaughn13, Johnny Meach, NTSC187, ddossey626, FlipUm
103086 Registered Users
Top Posters
TexDawg 83605
hopalong 74920
Pilothawk 73765
JDavis7873® 67378
John175 ® 60860
FattyMcButterpants 60574
Tritonman 57156
Derek 56797
SkeeterRonnie 52556
LoneStarSon® 52394
facebook
Forum Stats
103086 Members
61 Forums
864033 Topics
11340666 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11958496 - 11/30/16 10:08 AM how to remove old tranducers
Terry5357 Online   content
Outdoorsman

Registered: 10/05/16
Posts: 26
There are 2 thru hull transducers in my boat that aren't being used. any suggestions on how to cut thru the epoxy that was used to mount them.

Top
#11959096 - 11/30/16 04:39 PM Re: how to remove old tranducers [Re: Terry5357]
shut-up-and-fish Offline
TFF Celebrity

Registered: 02/08/10
Posts: 9226
Loc: Coppell Tx.

If you are not going to be installing another in-hull transducer then it's best to just leave them be. If you do not have the room to add one if you are wanting to then you will need to commence on chipping away with a hammer an flat head screw driver.
_________________________


It's all coming together and we have you covered @ Shut-Up-And-Fish LLC
for all your Humminbird, Minn Kota & Motorguide needs.
We install & educate as well!!! 972 737 8161


Top
#11959120 - 11/30/16 05:01 PM Re: how to remove old tranducers [Re: Terry5357]
Dayne Online   content
Extreme Angler

Registered: 12/16/06
Posts: 2889
I put a 2x4 against it and smack it with a hammer. It has never failed to knock them loose as the epoxy under them is very thin.

Top



© 1998-2016 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide