I went to fill gas tanks today and couldn't switch from tank 1 to tank 2 on console to see my tank levels. Also noticed I didn't have power to assessory buttons and no power to depth finder. After looking at manual, my only guess is the console went into 'sleep' mode. Has anyone ever had this issues and have any suggestions how to fix?

Thanks in advance for any help

You main switch off in back?

Main switch is on. I get power to console. The red lights come on but no power to accessories

Takes 5 hours to reset itself

Interesting. So, anyone know what causes this? How often it happens? What if I would have been on lake when this happens? Would I really need to wait 5 hrs for reset or is there a way to hard reset?

Thanks guys

I'm looking at manual, it tells you how to kick it out of sleep mode.

Try switching main breaker off then on. Then start 1234 start.

I have a 2010 Z520C, Here is what I do everytime, I switch main power switch in battery compartment to on, hit green start button 1 time to get red light on, enter code 1234 (mine is different), hit green start button again which turns second red light/everything on, then green start button again to crank engine. When done at end of day or parking boat for lunch or something I hit code 1234 and red kill button to turn off all power. I turn off main switch in battery compartment when boat is on trailer.

Try disconnecting the negative lead on the battery and reconnect it, that's kind of a hard reset, always worked for me when i would get a false alarm on a bilge pump or something of that nature.

Those main breakers are known to go bad. Check voltage on both sides of the breaker.