100% made in Texas, by Veterans. These spike kits for your power poles prevent wear and splintering to the fiberglass spikes, and aid in penetration and holding on soft bottoms. They also help prevent fiberglass splinters in your hands if you ever need to handle the spikes for any reason. In addition to that, they really clean up the look of your poles and give them that "MEAN" look. These kits are super easy to install with minimal tools required. The spikes are made from 6061 T6 aircraft grade aluminum for durability. Kits are in stock and ready to ship, for $85 to your door.
Just sand the last 2 inches of the spike, squirt half of the epoxy in the hydro spike and mix. Slide the heat shrink up, then tap the hydro spike on until it bottoms out. Use a heat gun or torch to for the heat shrink and you are done.