texasfishingforum.com logo
Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
TraeMartin, Power-Pole CS, T-Rigger, JoeGoes, EcKo
119150 Registered Users
Top Posters(All Time)
hopalong 120,580
TexDawg 119,524
Bigbob_FTW 94,902
John175☮ 85,892
Pilothawk 83,264
Bob Davis 81,500
Mark Perry 72,293
Derek 🐝 68,312
JDavis7873 67,416
Forum Statistics
Forums59
Topics1,037,850
Posts13,935,532
Members144,150
Most Online39,925
Dec 30th, 2023
Print Thread
Seal leak on Vault Hub System HELP!! #11886974 10/18/16 03:27 PM
Joined: Jun 2013
Posts: 1,349
GeoFisher Offline OP
Extreme Angler
OP Offline
Extreme Angler
Joined: Jun 2013
Posts: 1,349
I have a bad inner seal and it has started to leak quite severely. The entire inner part of the wheel is coated in oil/grease. The bearings appear to still be good as there is no "play" in the tire. If I am going to change the inner seal, are there any other parts I need to replace while in there? I have heard the outer cap is a one time use and should be replaced as well but I am not sure. Obviously I will need the grease fitting, and oil to refill it, but is there anything else I may need? Just hoping one of you have some experience with this system?


Everything on your bass boat is broken......You just don't know it yet.
Re: Seal leak on Vault Hub System HELP!! [Re: GeoFisher] #11895977 10/24/16 12:02 AM
Joined: Mar 2013
Posts: 220
Worm Dunk Offline
Outdoorsman
Offline
Outdoorsman
Joined: Mar 2013
Posts: 220
I too am in the same shape with one hub. Thanks GeoFisher for posting this. I've ordered outer seals for my brand of hub, looks like i will have to take the hub off to replace the one on the backside. Any advice will be greatly appreciated here as well.


"The fishing was so bad that even the liars weren't catching any"
Bill Dance
Re: Seal leak on Vault Hub System HELP!! [Re: GeoFisher] #11897247 10/24/16 06:53 PM
Joined: Jun 2013
Posts: 1,349
GeoFisher Offline OP
Extreme Angler
OP Offline
Extreme Angler
Joined: Jun 2013
Posts: 1,349
http://mcclaintrailers.com/vault/

Here is all I could find Worm. I have the seals, the hybrid oil, the 1/8 inch grease fitting, and the loctite for the caps. I emailed "UFP", the makers of the hub and they said I should have all I need. I am gonna give it a shot later today.

Last edited by GeoFisher; 10/24/16 06:53 PM.

Everything on your bass boat is broken......You just don't know it yet.
Previous Thread
Index
Next Thread

© 1998-2022 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide
Powered by UBB.threads™ PHP Forum Software 7.7.3