1999 optimax with about 120hours since new, 2 hours since work done,previous owner did not warm it up and seized number 6 cylinder. Had number 6 bored and installed .015 over mercury piston, cleaned injectors, both fuel and direct, vapor separator cleaned, thermostats upgrade kit installed, new propshaft seals and water pump, gear oil. I pulled this powerhead off of my last bass boat and replaced with a fully dressed efi powerhead, i saved this to repair and had planned to put it back on the boat, but I sold the boat before finishing. I purchased a midsection and gearcase to put this powerhead and adapter plate on. It runs good, but only has 2 hours on it since work was done so it still needs some breaking time.
The cowling that is on it is from a pro xs it has some rub damage on it in the corner but overall looks pretty good. I do have the original cover, which is significantly heavier so I put this one on there, buyer can have either one they want. Prop is not included. located in wylie,tx