Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
Shawnmorrow, c_mack, Rainwater, 0409, Weng
105918 Registered Users
Top Posters
TexDawg 86346
hopalong 78578
Pilothawk 75166
JDavis7873® 67382
John175 ® 65063
FattyMcButterpants 60793
Derek 🐝 58502
Tritonman 57644
LoneStarSon® 53410
SkeeterRonnie 53014
facebook
Forum Stats
105918 Members
60 Forums
804883 Topics
10172297 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11836763 - 09/19/16 09:11 AM Overheating 06Yahama 250 Hpdi
H-D Dad Offline
Angler

Registered: 02/26/11
Posts: 411
Loc: Lake Fork
After idling for a few minutes, then trying to get on plane the overheat alarm will sound. If I put it in neutral and rev it to about 1500 rpm for a few seconds, that seems to cool it enough to get on plane. It looks to be about 8 psi on plane. I suspect some type of water pressure problem.
I replaced the impelled with no change in the problem. Any help would be appreciated.
_________________________
Wes

Top
#11837330 - 09/19/16 01:34 PM Re: Overheating 06Yahama 250 Hpdi [Re: H-D Dad]
ssmith Offline
Extreme Angler

Registered: 11/22/07
Posts: 2873
Loc: scotland tx
check the poppet valve if it has not been serviced.

Top
#11837389 - 09/19/16 02:02 PM Re: Overheating 06Yahama 250 Hpdi [Re: H-D Dad]
H-D Dad Offline
Angler

Registered: 02/26/11
Posts: 411
Loc: Lake Fork
I am working on that right now. Trying to get all of the parts. I am not sure if that rubber piece comes out of the cylinder block or not. Can anyone help me with that
_________________________
Wes

Top
#11837453 - 09/19/16 02:32 PM Re: Overheating 06Yahama 250 Hpdi [Re: H-D Dad]
ssmith Offline
Extreme Angler

Registered: 11/22/07
Posts: 2873
Loc: scotland tx
yes it comes out it would be included with the spring an plunger.

Top
#11837468 - 09/19/16 02:38 PM Re: Overheating 06Yahama 250 Hpdi [Re: H-D Dad]
H-D Dad Offline
Angler

Registered: 02/26/11
Posts: 411
Loc: Lake Fork
Ok Thanks
_________________________
Wes

Top
#11838178 - 09/19/16 08:33 PM Re: Overheating 06Yahama 250 Hpdi [Re: H-D Dad]
H-D Dad Offline
Angler

Registered: 02/26/11
Posts: 411
Loc: Lake Fork
Got her going. 12 psi at 3500 rpms. Thanks sssmith for your help. Maybe I will make this part of annual service or at a minimum every 2 yrs.
_________________________
Wes

Top
#11838612 - 09/20/16 06:49 AM Re: Overheating 06Yahama 250 Hpdi [Re: H-D Dad]
gary purdy Offline
TFF Guru

Registered: 05/24/03
Posts: 11131
Loc: Littlefield Tx & Lake A. H. US...
I would order the improved poppet assembly. You need to service your thermostats too.
_________________________
The world will not be destroyed by those who do evil, but by those who watch them without doing anything. Remember what He has done and remember that He is not done yet!-- GOD IS GOOD

Top



© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide