I have been asked to put some pictures up of the jig tackle box that was seen in my video. I'm happy to oblige.
The plastic boxes can be bought at Hobby Lobby. I bought the big one that had all the smaller boxes in it already, but the smaller boxes can be bought individually.
The cork tiles I bought at WalMart.
The DAP contact cement I bought at Hobby Lobby.
Cut cork strips thin enough to allow the jig to be removed easily. If you cut them to thick, the eye and hook tip will bind on the cork when you try to remove the jig to use it. That can get frustrating and you can end up tearing the cork.
Another thing is, the plastic box HAS to be sanded in order for the glue to stick properly. If you do not scuff up the plastic with sand paper, the cork strips will eventually fall off.
I hope some find this helpful

Now that is COOL!!!

Very cool, thanks for sharing

Very nice!

I use foam instead of cork

I like it a lot.

Very nice!

Thank you very much! I WILL HAVE one of these.

Very nice! I need to do that