Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
Gulfie, Frannieb, SamRayburnRentals, W.BROWNING, wytex
108206 Registered Users
Top Posters
TexDawg 88865
hopalong 78895
Pilothawk 76455
John175® 67813
JDavis7873® 67390
FattyMcButterpants 60880
Derek 🐝 60451
Tritonman 58048
LoneStarSon® 54512
SkeeterRonnie 53407
facebook
Forum Stats
108206 Members
60 Forums
813638 Topics
10303209 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11812247 - 09/04/16 06:36 PM Xi5 issue
Dadsthatlove2fish Offline
Outdoorsman

Registered: 08/10/15
Posts: 138
My xi5 works fine in the driveway turns speeds decels but on the water put it down when i hit propeler button it turns on then right off a second later like tha battery is dead.

Got home tried it and everything works. Anyone have this issue or know whats up.
_________________________
God said to them, “Be fruitful and multiply and fill the earth and subdue it and have dominion over the fish of the sea and over the birds of the heavens and over every living thing that moves on the earth.” Genesis 1:28

Top
#11812349 - 09/04/16 07:51 PM Re: Xi5 issue [Re: Dadsthatlove2fish]
TCK73 Offline
TFF Team Angler

Registered: 03/26/15
Posts: 3659
Loc: Jack County
Test your breaker, and make sure it is sized correctly. In your driveway, freewheeling the prop, there is no load to speak of. In the water there is, and it may be tripping it. All this said assuming it has one that is self resetting.

Top
#11813269 - 09/05/16 01:08 PM Re: Xi5 issue [Re: Dadsthatlove2fish]
Bobby Milam Offline
TFF Team Angler

Registered: 07/13/14
Posts: 3458
Loc: Arlington
Is your wiring the correct size, I had similar issue but it was running on higher for more than a minute but not much longer.

Top
#11813297 - 09/05/16 01:42 PM Re: Xi5 issue [Re: Dadsthatlove2fish]
Dadsthatlove2fish Offline
Outdoorsman

Registered: 08/10/15
Posts: 138
I had a minnkota maxxum 80lb 24v that was on it. Used the same wire and same 50 amp.breaker and plug.
_________________________
God said to them, “Be fruitful and multiply and fill the earth and subdue it and have dominion over the fish of the sea and over the birds of the heavens and over every living thing that moves on the earth.” Genesis 1:28

Top
#11884342 - 10/16/16 10:47 PM Re: Xi5 issue [Re: Dadsthatlove2fish]
PhishWhisperer Offline
Angler

Registered: 07/29/12
Posts: 490
Loc: Orange, TX
Check to see if connections in the plug are clean and tight. Loose connections can cause high resistance that can cause a fire or trip the breaker.

Top
#11886154 - 10/17/16 09:03 PM Re: Xi5 issue [Re: Dadsthatlove2fish]
44 Diesel Offline
TFF Celebrity

Registered: 12/25/12
Posts: 5206
Loc: Burleson,TX
Originally Posted By: Dadsthatlove2fish
I had a minnkota maxxum 80lb 24v that was on it. Used the same wire and same 50 amp.breaker and plug.



You might want to rethink this setup. The Maxxum max amp draw is 56 amps as is most 24v trolling motors. A 60 amp is recommended. The Xi5 maybe similar in specs depending on size and as already mentioned check cables size.


Edited by 44 Diesel (10/17/16 09:23 PM)

Top



© 1998-2018 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide