Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
RushtonGregory, Bulletman77, thereason11, Lady808, PReaux
102720 Registered Users
Top Posters
TexDawg 82876
hopalong 74394
Pilothawk 73433
JDavis7873® 67377
FattyMcButterpants 60518
John175 ® 59892
Tritonman 56827
Derek 56416
SkeeterRonnie 52453
LoneStarSon® 52224
facebook
Forum Stats
102720 Members
61 Forums
859086 Topics
11270066 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11784864 - 08/18/16 07:29 PM Talon Mounting
Packers Offline
Outdoorsman

Registered: 06/22/08
Posts: 41

I'm sure someone else out there has had this same question. I own a Bass Cat PanteraII. It has a Slide Master Jack Plate on it. I was thinking of adding a Talon mounting plate onto the side of the jack plate. There are two bolts going through the side of the jack plate. It doesn't appear that the Talon Mounting Plate will line up with the Jack Plate. I called BC and Talon and could not get an honest answer. I wanted to find out for sure before I made a purchase and had to return parts. Any suggestions or pictures would be helpful. Thanks in advance.

Top
#11784872 - 08/18/16 07:32 PM Re: Talon Mounting [Re: Packers]
Andrew Y'Barbo Offline
Extreme Angler

Registered: 06/25/12
Posts: 1111
Loc: Lufkin Texas
They will. The Talon mounts are super universal.

Top
#11784875 - 08/18/16 07:34 PM Re: Talon Mounting [Re: Packers]
Andrew Y'Barbo Offline
Extreme Angler

Registered: 06/25/12
Posts: 1111
Loc: Lufkin Texas

Top
#11785036 - 08/18/16 09:03 PM Re: Talon Mounting [Re: Andrew Y'Barbo]
Packers Offline
Outdoorsman

Registered: 06/22/08
Posts: 41

Thanks Guys, especially Andrew. When you wired the Talon, did you wired to which battery and where did you wire the ground wire. Thanks again.

Top
#11785050 - 08/18/16 09:09 PM Re: Talon Mounting [Re: Packers]
Andrew Y'Barbo Offline
Extreme Angler

Registered: 06/25/12
Posts: 1111
Loc: Lufkin Texas
Originally Posted By: Packers

Thanks Guys, especially Andrew. When you wired the Talon, did you wired to which battery and where did you wire the ground wire. Thanks again.


That was not my write up. However we usually use the cranking battery when we wire them at the shop. Most people do not hook the green wire up. If your p2 is one of the newer boats it should have a breaker switch on the positive post. Hook to that for power. So you can turn it off and it kills power to everything.

Top
#11785371 - 08/19/16 06:42 AM Re: Talon Mounting [Re: Packers]
206champion Online   content
Extreme Angler

Registered: 02/12/04
Posts: 1610
Loc: Decatur
They will line up I just put to on my boat I have a slidemaster
_________________________
www.westforkbassclub.com

Top
#11786828 - 08/19/16 08:49 PM Re: Talon Mounting [Re: Packers]
Packers Offline
Outdoorsman

Registered: 06/22/08
Posts: 41
Did the bolts that came with the mounting plate fit the holes in the jack plate alright?

Top
#11786861 - 08/19/16 09:02 PM Re: Talon Mounting [Re: Packers]
Andrew Y'Barbo Offline
Extreme Angler

Registered: 06/25/12
Posts: 1111
Loc: Lufkin Texas
If I remember correctly take the old side plates off and replace with the bracket.

Top
#11788645 - 08/21/16 08:36 AM Re: Talon Mounting [Re: Packers]
brennansgrandpa Offline
Angler

Registered: 04/06/08
Posts: 319
And be sure to use the little tube of grease that comes with it on the threads of the bolts. Learned this one the hard way.
_________________________
Basscat Boat Owner

Top
#11788733 - 08/21/16 09:50 AM Re: Talon Mounting [Re: brennansgrandpa]
Andrew Y'Barbo Offline
Extreme Angler

Registered: 06/25/12
Posts: 1111
Loc: Lufkin Texas
Originally Posted By: brennansgrandpa
And be sure to use the little tube of grease that comes with it on the threads of the bolts. Learned this one the hard way.


Gotta love cheap stainless. I always use dawn dish soap on all stainless fasteners.

Top



© 1998-2016 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide