Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
ladyangler125, AHS Basser, MoJoMorris, suhil has, Jr baiter
106516 Registered Users
Top Posters
TexDawg 87126
hopalong 78812
Pilothawk 75784
JDavis7873® 67386
John175 ® 65889
FattyMcButterpants 60793
Derek 🐝 59024
Tritonman 57763
LoneStarSon® 53818
SkeeterRonnie 53123
facebook
Forum Stats
106516 Members
61 Forums
863945 Topics
12277705 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11668379 - 06/15/16 08:17 AM MotorGuide Xi5 Mounting Bracket (Minn Kota too)
BlueNitro Online   content
TFF Team Angler

Registered: 06/08/10
Posts: 4972
Loc: Lewisville
Many of you (like myself) have gone to one of the motor-drive steering trolling motors for their anchoring ability. If you are having an issue with the mounting of these units or are having damage occur due to contact while launching, loading or docking I would like to offer up the following possible solution.

http://texasfishingforum.com/forums/ubbthreads.php/topics/11664834#Post11664834

I don't know how many of you visit that section so I posted it up here as well. Mods - if you need to move or delete, I understand. I was just trying to share with fellow fishermen or those having issues with their trolling motors.

Top
#11676647 - 06/19/16 04:45 PM Re: MotorGuide Xi5 Mounting Bracket (Minn Kota too) [Re: BlueNitro]
skunked-alot Offline
Outdoorsman

Registered: 09/23/10
Posts: 223
Loc: lewisville,tx
Guys,

I just wanted to talk a bit about the bracket that Ron has made for the Xi5. I had the pleasure of not only seeing it in person but getting to see it put through some testing. It's extremely functional. I watched it as we launched, and docked the boat and it eliminates all the drawback of having the Xi5. I'm sure we can all agree the amount of overhang these units have is a turn off because of slamming the roller and pulling up to docks. Not only does it add mounting surface area for piece of mind but with it in the up position you don't have to worry about damaging the unit. Once on the water there is no slop or noise from the mount when on the trolling motor. We jumped a few rollers out there from big wakes and it took it in stride with no problem. I think it's a well designed product that works perfectly for what it's intended for. If you have an Xi5 or are thinking about getting one do yourself a favor and check out Ron's lifesaver mount, it won't disappoint.
_________________________


Top



© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide