Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
Ethan Land, Jasonrh83, MLB, Sergio.gvl, Armadillo Outfitters
105715 Registered Users
Top Posters
TexDawg 85922
hopalong 78097
Pilothawk 75038
JDavis7873® 67382
John175 ® 64772
FattyMcButterpants 60790
Derek 🐝 58248
Tritonman 57554
LoneStarSon® 53241
SkeeterRonnie 52973
facebook
Forum Stats
105715 Members
60 Forums
801556 Topics
10131037 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11633086 - 05/28/16 11:16 PM kill switch
Redwatermelon Offline
Outdoorsman

Registered: 07/04/14
Posts: 70
Went out fishing today and realized that my kill switch is not working.
It's a 2000 Skeeter zx 180 with a Yamaha vmax 150. Is this common? I never heard of on going bad.

Top
#11633088 - 05/28/16 11:18 PM Re: kill switch [Re: Redwatermelon]
Redwatermelon Offline
Outdoorsman

Registered: 07/04/14
Posts: 70
Is it as easy as changing out the switch or not?

Top
#11633090 - 05/28/16 11:19 PM Re: kill switch [Re: Redwatermelon]
Redwatermelon Offline
Outdoorsman

Registered: 07/04/14
Posts: 70
Any help would be greatly appreciated! Thanks in advance!

Top
#11633171 - 05/29/16 03:36 AM Re: kill switch [Re: Redwatermelon]
Michael@mme Offline
Green Horn

Registered: 05/28/16
Posts: 4
Loc: Quitman texas
If it's just the kill switch assembly itself it's not difficult at all to do... just 2 wires. Just unmount it and the key switch and pull it out. The key switch is connected to the killswitch with a metal bracket usually.
_________________________
Michael's Motors and Electronics.

Top
#11633175 - 05/29/16 03:46 AM Re: kill switch [Re: Redwatermelon]
Michael@mme Offline
Green Horn

Registered: 05/28/16
Posts: 4
Loc: Quitman texas
And to answer your other question.. take a multimeter and disconnect the two wires from the back and test continuity.
_________________________
Michael's Motors and Electronics.

Top
#11633302 - 05/29/16 08:22 AM Re: kill switch [Re: Redwatermelon]
gary purdy Online   content
TFF Guru

Registered: 05/24/03
Posts: 11097
Loc: Littlefield Tx & Lake A. H. US...
Have seen the kill switch act up because the lanyard plastic end becomes worn and will not hold the spring loaded switch out enough. The kill switch is not a normal part to fail. I have never seen a bad Yamaha kill switch.
_________________________
�The world will not be destroyed by those who do evil, but by those who watch them without doing anything� Remember what He has done and remember that He is not done yet! GOD IS GOOD

Top



© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide