Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
meltoco, East Rain, Sdav20, TheBeast1980, FamilyMan6
103182 Registered Users
Top Posters
TexDawg 83719
hopalong 75017
Pilothawk 73833
JDavis7873® 67378
John175 ® 61126
FattyMcButterpants 60594
Tritonman 57183
Derek 56843
SkeeterRonnie 52571
LoneStarSon® 52440
facebook
Forum Stats
103182 Members
62 Forums
865722 Topics
11364445 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11602665 - 05/14/16 10:14 AM Hint to repair my reels or repair shop north of Dallas?
jippedgenes Offline
Angler

Registered: 08/12/11
Posts: 359
I am familiar with SW parts. But I just don't have time to get down there as I live in Lewisville and work pretty much whenever they are ope. Let my kid take a couple of my rods to fish in the gulf with his friends and their family and he let the reels get wet with salt water while wading and did not rinse them. They are Curado 200 SF. I sprayed them with WD40 then rinsed em out and oiled them with proper reel oil and they work now but it has decreased my casting distance by 30%. I a surethi s not the right way to clean a reel but I figured I would try it.

Hints?

Top
#11603163 - 05/14/16 06:19 PM Re: Hint to repair my reels or repair shop north of Dallas? [Re: jippedgenes]
03svtsnakevert Offline
Extreme Angler

Registered: 04/05/12
Posts: 2477
Loc: Copperas Cove, TX
Originally Posted By: jippedgenes
I am familiar with SW parts. But I just don't have time to get down there as I live in Lewisville and work pretty much whenever they are ope. Let my kid take a couple of my rods to fish in the gulf with his friends and their family and he let the reels get wet with salt water while wading and did not rinse them. They are Curado 200 SF. I sprayed them with WD40 then rinsed em out and oiled them with proper reel oil and they work now but it has decreased my casting distance by 30%. I a surethi s not the right way to clean a reel but I figured I would try it.

Hints?



Strip them completely down...remove all bearings and check them for smoothness...use simple green to clean them and regrease and oil

Top
#11606508 - 05/16/16 04:43 PM Re: Hint to repair my reels or repair shop north of Dallas? [Re: jippedgenes]
Nathan "Bull" Montgomery Offline
TFF Celebrity

Registered: 02/23/11
Posts: 5776
Loc: Fort Worth, Tx.
Im assuming you don't know how to tear them down but it will need to be done. Soak the bearings in acetone or lighter fluid and then let them air dry and re oil. You can get to the spool bearings without having to completely disassemble.

And on a side note you can also ship them out to either myself or Steve (the gentleman who posted above me) and we could take care of them for you. Good luck!

Top
#11623937 - 05/24/16 07:41 PM Re: Hint to repair my reels or repair shop north of Dallas? [Re: jippedgenes]
Frisco Kid Offline
Outdoorsman

Registered: 01/27/08
Posts: 115
Loc: San Antonio, TX
I've always used acetone to clean the bearings. Simple Green is an acceptable alternative? Do you dilute?
_________________________


Not all those who wander are lost.

Top
#11626253 - 05/25/16 04:20 PM Re: Hint to repair my reels or repair shop north of Dallas? [Re: jippedgenes]
Nathan "Bull" Montgomery Offline
TFF Celebrity

Registered: 02/23/11
Posts: 5776
Loc: Fort Worth, Tx.
Dont use the simple green for the bearings! He was talking about cleaning the rest of the reel with simple green. I use a 50/50 mix with water

Top



© 1998-2016 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide