Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
MinMirny, lakefork15, Littledog, chatterbait10, DeekBrazo
106373 Registered Users
Top Posters
TexDawg 86933
hopalong 78792
Pilothawk 75581
JDavis7873® 67385
John175 ® 65737
FattyMcButterpants 60793
Derek 🐝 58869
Tritonman 57722
LoneStarSon® 53710
SkeeterRonnie 53103
facebook
Forum Stats
106373 Members
61 Forums
812047 Topics
10252277 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11580583 - 05/03/16 12:24 PM thinking about a new motor
CHADRO61 Offline
Green Horn

Registered: 05/02/16
Posts: 4
Loc: Texas
I have a weldbuilt 1648 semi-v with a 2007 20hp honda 4stroke. The boat is rated for a 40hp so i was looking at upgrading althoug thinking 30 would be enough. What motor would y'all go with 30hp or 40hp and what brand? Not a Honda


Edited by CHADRO61 (05/03/16 12:25 PM)

Top
#11582779 - 05/04/16 12:20 PM Re: thinking about a new motor [Re: CHADRO61]
samuel joff Offline
Green Horn

Registered: 04/01/16
Posts: 17
40hp is much better but 30hp is decent. Pick up any one which is under your budget. Welcome!

Top
#11594683 - 05/10/16 03:30 PM Re: thinking about a new motor [Re: CHADRO61]
BKT Offline
Extreme Angler

Registered: 09/27/13
Posts: 1282
Loc: Apple Springs
If I had to buy a new motor right now, I'd be looking hard at a 40-50hp Tohatsu

Top
#11608210 - 05/17/16 12:31 PM Re: thinking about a new motor [Re: CHADRO61]
CHADRO61 Offline
Green Horn

Registered: 05/02/16
Posts: 4
Loc: Texas
FROM WHAT IVE BEEN READING ITS BETWEEN A 40HP TOHATSU OR THE 40HP EVINRUDE ETEC
BUT FROM WHAT I UNDERSTAND THE ETEC DOESNT COME AS A SHORT SHAFT SO I WOULD HAVE TO GET A JACK PLATE

Top
#11634276 - 05/29/16 08:03 PM Re: thinking about a new motor [Re: CHADRO61]
taterpop Offline
Pro Angler

Registered: 01/30/13
Posts: 802
I have run Nissan / Tohatsu motors for the last 27 years I like them.

Top
#11688081 - 06/25/16 08:18 AM Re: thinking about a new motor [Re: CHADRO61]
fe1 Offline
Angler

Registered: 12/27/14
Posts: 371
Loc: Texarkana
I have a Tohatsu 50 TLDI short shaft on a 1650 fb runs 35 mph with a tail wind. You can ignore the HP rating unless you fish coastal waters where there is coast guard.


Edited by fe1 (06/25/16 08:21 AM)

Top
#11725550 - 07/15/16 10:29 PM Re: thinking about a new motor [Re: CHADRO61]
Mudbone Offline
Extreme Angler

Registered: 07/23/03
Posts: 1119
Loc: Cuney, Texas
Have an Etec on my Jon boat and really like the tilt/trim on the end of the tiller, the easy to reach shift knob on the tiller and the adjustable tensioner to help with torque
Very quiet and carries a duck hunting load very well when we get all loaded down

Top



© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide