|
Forums59
Topics1,038,988
Posts13,956,958
Members144,184
| |
Most Online39,925
Dec 30th, 2023
|
|
 Jackplate is stuck HELP!!!!
#11554842
04/20/16 05:33 PM
|
Joined: Dec 2015
Posts: 13
ETXBBG
OP
Green Horn
|
|
OP
Green Horn
Joined: Dec 2015
Posts: 13 |
I've got a slide master 8" jack plate and it's stuck all four side bolts backed off and the adjustment all thread will not move!!!!
|
|
 Re: Jackplate is stuck HELP!!!!
[Re: ETXBBG]
#11555747
04/21/16 01:15 AM
|
Joined: Jan 2005
Posts: 16,945
Pat Goff
TFF Guru
|
|
TFF Guru
Joined: Jan 2005
Posts: 16,945 |
Penetrating oil, patience and a rubber mallet.
Pat Goff Seadrift TX ![[Linked Image]](https://i.ibb.co/X48Kbbq/scooter-shallow.jpg)
|
|
|
Re: Jackplate is stuck HELP!!!!
[Re: ETXBBG]
#11558583
04/22/16 12:59 PM
|
Joined: Apr 2007
Posts: 401
Josh@SCP
Angler
|
|
Angler
Joined: Apr 2007
Posts: 401 |
Once you get it to move take a ton of anti-seize to all the bolts including the center adjusting bolt. If you cant get the plate to slide after the bolts are all freed up then hang the motor and lift a little bit. Start adjusting again, it will move.
|
|
|
Re: Jackplate is stuck HELP!!!!
[Re: ETXBBG]
#11558584
04/22/16 12:59 PM
|
Joined: Apr 2007
Posts: 401
Josh@SCP
Angler
|
|
Angler
Joined: Apr 2007
Posts: 401 |
If you dont have a hoist you can use a jack underneath the plate with some blocks to do the same thing.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
