Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
Phat Phish, BlueGill72, Theodore, LRDHAWKEYE, ScottWFlor
104785 Registered Users
Top Posters
TexDawg 84864
hopalong 77229
Pilothawk 74602
JDavis7873® 67382
John175 ® 63084
FattyMcButterpants 60664
Derek 🐝 57546
Tritonman 57445
SkeeterRonnie 52884
LoneStarSon® 52769
facebook
Forum Stats
104785 Members
60 Forums
790931 Topics
9998381 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11554842 - 04/20/16 12:33 PM Jackplate is stuck HELP!!!!
ETXBBG Offline
Green Horn

Registered: 12/21/15
Posts: 10
I've got a slide master 8" jack plate and it's stuck all four side bolts backed off and the adjustment all thread will not move!!!!

Top
#11555747 - 04/20/16 08:15 PM Re: Jackplate is stuck HELP!!!! [Re: ETXBBG]
Pat Goff Online   content
TFF Celebrity

Registered: 01/29/05
Posts: 5093
Loc: Marble Falls/Seadrift
Penetrating oil, patience and a rubber mallet.
_________________________
Pat Goff
Marble Falls/Seadrift TX

Top
#11558583 - 04/22/16 07:59 AM Re: Jackplate is stuck HELP!!!! [Re: ETXBBG]
Josh@SCP Offline
Angler

Registered: 04/27/07
Posts: 400
Loc: Winnsboro TX
Once you get it to move take a ton of anti-seize to all the bolts including the center adjusting bolt. If you cant get the plate to slide after the bolts are all freed up then hang the motor and lift a little bit. Start adjusting again, it will move.
_________________________

Top
#11558584 - 04/22/16 07:59 AM Re: Jackplate is stuck HELP!!!! [Re: ETXBBG]
Josh@SCP Offline
Angler

Registered: 04/27/07
Posts: 400
Loc: Winnsboro TX
If you dont have a hoist you can use a jack underneath the plate with some blocks to do the same thing.
_________________________

Top



© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide