Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
jwhit88, Fisherman954, Mud Liger, Joe111, EL Mike
102702 Registered Users
Top Posters
TexDawg 82849
hopalong 74375
Pilothawk 73411
JDavis7873® 67377
FattyMcButterpants 60518
John175 ® 59859
Tritonman 56817
Derek 56400
SkeeterRonnie 52450
LoneStarSon® 52211
facebook
Forum Stats
102702 Members
61 Forums
858760 Topics
11265515 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11537368 - 04/12/16 01:55 PM helix linking
C_Fisher Offline
Pro Angler

Registered: 07/05/07
Posts: 569
Loc: weatherford, tx
im planning to buy a helix 12si and a helix 10sonar/gps. Can these 2 be linked together? Will i be able to see di images from the 12 on the 10 screen?


Edited by C_Fisher (04/12/16 01:58 PM)

Top
#11537458 - 04/12/16 02:33 PM Re: helix linking [Re: C_Fisher]
Wayne P. Online   content
TFF Team Angler

Registered: 11/16/10
Posts: 3436
Loc: Charlottesville, Va
Yes with Ethernet.

Each unit would need an Ethernet adapter AS EC QDE.
Then an Ethernet cable long enough to go between them.

SI, blended DI, dedicated DI, 2D sonar, GPS data, Ethernet accessories can be cross-shared with a Sonar model, DI model, and a SI model.

Since neither of the units you listed are DI, there will be no dedicated DI possible since there is no source. DI would be a blend of the two SI pulses.

You can use the 360 to provide SI and DI to either unit also.


Edited by Wayne P. (04/12/16 02:37 PM)
_________________________
Humminbird Helix 12 CHIRP SI, 1198c SI, 1198c SI, ONIX 10 SI NT, Helix 7 CHIRP SI GPS G2, 360, RC-1

Top
#11547494 - 04/16/16 10:47 PM Re: helix linking [Re: C_Fisher]
toofy Offline
Outdoorsman

Registered: 12/26/15
Posts: 244
Loc: Fort Worth
I'm thinking about a similar setup with Helix 12 SI Chirp on the console and some form of Helix 12 on the bow with 360 on the trolling motor. If I get a Helix 12 sonar/GPS on the bow (cheapest way to view 360 on a Helix 12) then can I still view the transom SI on the bow also? Or do I need to get a Helix 12 SI on the bow also to do that?

Top
#11547538 - 04/16/16 11:23 PM Re: helix linking [Re: C_Fisher]
44 Diesel Offline
TFF Team Angler

Registered: 12/25/12
Posts: 3420
Loc: Burleson,TX
I'm thinking about a similar setup with Helix 12 SI Chirp on the console and some form of Helix 12 on the bow with 360 on the trolling motor. If I get a Helix 12 sonar/GPS on the bow (cheapest way to view 360 on a Helix 12) then can I still view the transom SI on the bow also? Or do I need to get a Helix 12 SI on the bow also to do that?




you will need the 5 port Ethernet switch to connect all 3 and a Ethernet cable from both helix units and one from the 360 to the Ethernet switch, but yes the helix 12 sonar/gps will work


Edited by 44 Diesel (04/16/16 11:47 PM)

Top



© 1998-2016 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide