|
Forums59
Topics1,038,963
Posts13,956,516
Members144,184
| |
Most Online39,925
Dec 30th, 2023
|
|
 Networking HDS Units
#11518455
04/03/16 02:02 AM
|
Joined: Apr 2013
Posts: 51
D. Ray
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Apr 2013
Posts: 51 |
Just networked(NEMA2000) an HDS 5 G1 and HDS 5 G2. They share new waypoints but existing waypoints on each unit are not being shared with the other.....any ideas about the issue?
|
|
|
Re: Networking HDS Units
[Re: D. Ray]
#11518574
04/03/16 02:59 AM
|
Joined: Dec 2008
Posts: 16,165
grout-scout
TFF Guru
|
|
TFF Guru
Joined: Dec 2008
Posts: 16,165 |
That's all nmea network will do, only share wypts at the time they are made with both graphs on.
You want an Ethernet cable, they will share across the board anytime.
|
|
|
Re: Networking HDS Units
[Re: D. Ray]
#11518848
04/03/16 01:39 PM
|
Joined: Apr 2013
Posts: 51
D. Ray
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Apr 2013
Posts: 51 |
Well that's great so all I needed was an Ethernet cable to share wypts not the whole nmea backbone set up..... So I assume both units connect THRU THE LSS-1 by Ethernet cable?
|
|
|
Re: Networking HDS Units
[Re: D. Ray]
#11519109
04/03/16 05:07 PM
|
Joined: Dec 2008
Posts: 16,165
grout-scout
TFF Guru
|
|
TFF Guru
Joined: Dec 2008
Posts: 16,165 |
Yeah if you have a LSS module you run an Ethernet to each graph from the module. If you don't have a module, just run an enet cable between both graphs.
If you ever get a point 1 heading sensor then you will use the nmea for that and things that hook up to the motor use nmea.
Last edited by grout-scout; 04/03/16 05:09 PM.
|
|
|
Re: Networking HDS Units
[Re: grout-scout]
#11520774
04/04/16 04:01 PM
|
Joined: Apr 2013
Posts: 51
D. Ray
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Apr 2013
Posts: 51 |
Thank you for the help. I ran Ethernet cable last night.... works great! I do plan to add a Point 1.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
