Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
JustinStokesOutdoors, Gary D Watters, Don Dison, loop, Gadawgs
102735 Registered Users
Top Posters
TexDawg 82894
hopalong 74407
Pilothawk 73446
JDavis7873® 67377
FattyMcButterpants 60518
John175 ® 59917
Tritonman 56836
Derek 56445
SkeeterRonnie 52463
LoneStarSon® 52225
facebook
Forum Stats
102735 Members
61 Forums
859351 Topics
11273977 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11510815 - 03/30/16 09:31 AM Outboard question
txninja Offline
Extreme Angler

Registered: 02/17/09
Posts: 1425
Loc: the panhandle
I have a 1995 force 70hp on a boat that I am looking at selling. I ran it all last year without a problem. I bring it home this week to fire it up and I get it running. I then shut it off and turn the key and hear a clicking noise. First thought was dead battery(although power trim is still working fine), so I jump it off my truck. No luck, still clicking. I then jump the starting solenoid with a screw driver and the starter jumps up and hits the flywheel briefly and then nothing after that. I was having a good spark when jumping the solenoid. Any suggestions??? Thanks

Top
#11510891 - 03/30/16 09:54 AM Re: Outboard question [Re: txninja]
centexChamp92 Offline
Green Horn

Registered: 05/21/13
Posts: 18
check possibly a faulty kill switch, or possibly power packs/coil packs

Top
#11511058 - 03/30/16 10:59 AM Re: Outboard question [Re: txninja]
gary purdy Offline
TFF Guru

Registered: 05/24/03
Posts: 10536
Loc: Littlefield Tx & Lake A. H. US...
First sounds like you could have a bad battery connection. You could have blown the fuse the beside the solenoid while jumping. Does the motor turn by hand?
_________________________
“The world will not be destroyed by those who do evil, but by those who watch them without doing anything” GOD IS GOOD

Top
#11511285 - 03/30/16 12:24 PM Re: Outboard question [Re: txninja]
txninja Offline
Extreme Angler

Registered: 02/17/09
Posts: 1425
Loc: the panhandle
I can spin the flywheel by hand. I cleaned the connections and checked the fuse at the panel.
_________________________
http://goldenspreadbassmasters.webs.com/

Top
#11511455 - 03/30/16 01:32 PM Re: Outboard question [Re: txninja]
crapicat Offline
TFF Celebrity

Registered: 01/23/13
Posts: 5011
Loc: Grandview, TX
Did you check the fuse Right Beside the solenoid?...Gary have you got a schematic to show that fuse location?

Top
#11513318 - 03/31/16 08:24 AM Re: Outboard question [Re: txninja]
crapicat Offline
TFF Celebrity

Registered: 01/23/13
Posts: 5011
Loc: Grandview, TX
Originally Posted By: txninja
I can spin the flywheel by hand. I cleaned the connections and checked the fuse at the panel.


Can someone provide a description or schematic of where the fuse is located...It doesn't seem like he understands about the fuse location...

Top
#11516173 - 04/01/16 12:27 PM Re: Outboard question [Re: txninja]
gary purdy Offline
TFF Guru

Registered: 05/24/03
Posts: 10536
Loc: Littlefield Tx & Lake A. H. US...
_________________________
“The world will not be destroyed by those who do evil, but by those who watch them without doing anything” GOD IS GOOD

Top
#11518766 - 04/03/16 07:05 AM Re: Outboard question [Re: txninja]
BAIT956 Offline
Angler

Registered: 02/27/03
Posts: 354
Loc: Lake Fork Tx.
Man, you guys are good. TFF is the best.

Top



© 1998-2016 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide