Main Menu
Newest Members
RodRaider55, CoachBlackburn, Dug1970, K-Machado, RadarLuv
107363 Registered Users
Top Posters
TexDawg 88103
hopalong 78894
Pilothawk 76176
JDavis7873® 67390
John175® 66789
FattyMcButterpants 60846
Derek 🐝 59752
Tritonman 57914
LoneStarSon® 54248
SkeeterRonnie 53292
Forum Stats
107363 Members
60 Forums
823613 Topics
10415474 Posts

Max Online: 36273 @ 01/23/13 02:34 PM
Topic Options
#11510095 - 03/29/16 10:14 PM dirt dauber nests- ok to spray water on powerhead?
Nathan at Fork Offline
Extreme Angler

Registered: 06/18/07
Posts: 2568
Loc: Emory, TX
Ive got a MAriner 80hp that Ive had set up for several years. I took the top off and it is coated in mud dobber nests all on the inside. Ive broken all of them off I can see so other than a bunch of places of mud residue all over everything where the nests were, there is a large amount of mud nest pieces and debris down in the powerhead all around it that I cant get to. Can water be sprayed down in there or around on the powerhead for that matter? If not, how do I get all this stuff out? Thanks.

#11510403 - 03/30/16 06:55 AM Re: dirt dauber nests- ok to spray water on powerhead? [Re: Nathan at Fork]
gary purdy Offline
TFF Guru

Registered: 05/24/03
Posts: 11369
Loc: Littlefield Tx & Lake A. H. US...
You need to pull the air cover off of the front anyway to check for the mud dobbers. Put something in each carb. Spray away.
The world will not be destroyed by those who do evil, but by those who watch them without doing anything. Remember what He has done and remember that He is not done yet!-- GOD IS GOOD


© 1998-2017 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide