Mariner 25hp shift linkage - retainer pin slid inwards??

Print Thread

Mariner 25hp shift linkage - retainer pin slid inwards?? #11500605 03/25/16 03:15 PM
Joined: Dec 2004 Posts: 267 North Dallas P PondFishin OP Angler
OP PondFishin Angler P Joined: Dec 2004 Posts: 267 North Dallas	25hp Mariner 2 stroke. I was reconnecting the shift linkage and the pin it flips over and is secured onto got pushed in. The diagram above shows the pin in red. How do I get this pin back out so I can flip the grey thing over it to secure it?? The starter has a stripped bolt from someone else so I can't pull it. The pin is non-ferrous - I tried a neodymium magnet on a stick to get it back out. Last edited by PondFishin; 03/25/16 03:17 PM.

Re: Mariner 25hp shift linkage - retainer pin slid inwards?? [Re: PondFishin] #11500625 03/25/16 03:27 PM
Joined: Dec 2004 Posts: 267 North Dallas P PondFishin OP Angler
OP PondFishin Angler P Joined: Dec 2004 Posts: 267 North Dallas	Got it back out... http://www.marineengine.com/parts/mercury_marine_parts/static/img/COMMON/21842.gif It was exactly where you would think (push in on #12)

Hop To